Partnered with IBM

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Streamline Drill Pipe Management with PipeDNA: Enhancing Efficiency and Visibility on the Drilling Rig Efficient management of drill pipe is a critical factor in ensuring smooth drilling operations in the oil and gas industry. Introducing PipeDNA, a smart new platform designed to revolutionize the way drill pipe is managed on the drilling rig. With its cloud-based solution and powerful features, PipeDNA empowers drilling contractors, oilfield rental companies, and oilfield services providers to proactively manage their drill pipe inventory, increase visibility, and optimize their drilling operations. Full Inventory Management and Tracking: PipeDNA offers a comprehensive set of features that enable drill pipe stakeholders to gain complete control over their inventory. With its inventory management and tracking capabilities, PipeDNA provides real-time information on drill pipe utilization, activity, and trends. This invaluable insight allows drilling contractors to make informed decisions regarding drill pipe allocation, maintenance schedules, and resource optimization. Efficient Logistics Management: Managing logistics operations on the drilling rig can be complex and time-consuming. PipeDNA simplifies this process by offering robust logistics management functionalities. Users can efficiently handle shipments, track the status of drill pipe deliveries, manage documentation, and even bundle pipes for streamlined transportation. With PipeDNA, logistics become a well-coordinated and seamless aspect of drill pipe management, saving time and resources. Streamlined Inspection Management: Inspection is crucial for ensuring the integrity and safety of drill pipe. PipeDNA's inspection management feature enables users to efficiently manage inspection jobs across multiple sites, track job statuses, and maintain inspection profiles. This capability ensures that inspections are conducted in a timely manner, minimizing downtime and optimizing drilling operations. Automated Tally Operations: Pipe tallying is a time-consuming task prone to human errors when done manually. PipeDNA simplifies tally operations by providing users with the ability to create and manage tally operations. Automated workflows streamline the tallying process, reducing errors and saving valuable time. By automating tally operations, PipeDNA allows drill pipe stakeholders to focus on more critical aspects of their drilling operations. Enhanced Identification and Traceability: Quick and accurate identification of drill pipe assets is crucial for efficient drilling operations. PipeDNA offers a robust identification and traceability system that provides users with comprehensive drill pipe details, activity history, and traceability documentation. With PipeDNA, drill pipe stakeholders can quickly locate and track specific pipes, ensuring smooth operations and minimizing the risk of errors. Support for Various Drill Pipe Types: PipeDNA's innovative technology is designed to accommodate various types of drill pipe, providing flexibility and adaptability. The platform supports the management of new and premium drill pipe, conventional and spiral HWDP (Heavy Weight Drill Pipe), landing strings, and drilling risers. Whether it's EUE or NUE tubing, workover strings, slick or spiral drill collars, or API 6A flanges, PipeDNA can efficiently manage a wide range of drill pipe and tube types, catering to the diverse needs of the drilling industry. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to streamline workflows and digitize drill pipe management processes. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating seamless identification and tracking. PipeDNA is also RFID-ready, providing integration support for RFID technologies, including labels and asset tags. Furthermore, the platform supports IoT data integration using the MQTT standard, allowing fast and efficient integration of sensor data. PipeDNA is transforming drill pipe management on the drilling rig, offering a cloud-based platform that enhances efficiency, increases visibility, and optimizes drilling operations. With its powerful features, seamless integrations, and innovative technology, PipeDNA empowers drilling contractors, rental companies, and oilfield services providers to proactively manage their drill pipe inventory, reduce costs, and improve overall performance. Streamline your drill pipe management processes with PipeDNA and elevate your drilling operations to new heights of productivity and success.

Boost Your Business Efficiency with Printer Leasing from CWB National Leasing Revolutionizing Your Document Handling with Flexible and Advanced Printing Solutions In the modern business landscape, having access to high-quality printers is essential for efficient document management and communication. Leasing printers through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to enhance their printing capabilities. Here’s how leasing printers can benefit your business: 1. Fast Access to High-Performance Printers CWB National Leasing recognizes the importance of advanced printing technology in your business operations. They offer a quick leasing process, with decisions typically made within 48 hours of application submission. This ensures that your printers can be delivered and operational quickly, enhancing your productivity and meeting your document handling needs promptly. 2. Increased Financial Flexibility Leasing printers with CWB National Leasing enhances your buying power. It allows you to free up capital by opting for periodic payments over a substantial upfront purchase. The flexibility to add extra features or accessories to your printers for a small payment increase allows for customization to meet specific business requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your printers start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal variations in revenue, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing printers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease printers through CWB National Leasing is a strategic decision that provides your business with essential printing equipment while maintaining financial agility. It ensures access to state-of-the-art printers, vital for efficient and high-quality document production, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved document quality, and increased productivity, contributing significantly to the success and growth of your business in a competitive market.

Revolutionize Your Mining Experience with the Wisdom KL8MS Corded Miner's Cap Lamp from Provix Are you looking for a reliable, powerful, and safe lighting solution for your mining activities? Look no further than the Wisdom KL8MS Corded Miner's Cap Lamp, offered by Provix. This state-of-the-art cap lamp is designed to meet the rigorous demands of underground mining environments, ensuring both safety and efficiency. Unmatched Lighting Performance The KL8MS features a high-capacity 10,400mAh battery, providing a continuous discharging time of 13 hours, ensuring long-lasting performance for extended shifts. Its main light LED, with a working voltage of 3.0V and power of 2.67W, delivers an impressive luminous flux of 430 lm. This powerful lamp illuminates your work area with a stunning 18,000 lx lighting degree, making it one of the brightest on the market. Built to Last Durability is key in mining equipment, and the KL8MS doesn’t disappoint. With a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours, this lamp is built to endure. The battery life is equally impressive, offering 1,200 cycles under reasonable working conditions. Safety First Safety is paramount in mining, and the KL8MS cap lamp is designed with this in mind. It’s explosion-proof, complying with ATEX GROUP II standards, and boasts an IP68 waterproof rating. The short circuit protect time of less than 320 μs adds an extra layer of safety, ensuring peace of mind in challenging conditions. Convenient and Comfortable Design Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL8MS is designed for comfort and ease of use. The battery box measures a compact 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), making it unobtrusive and comfortable to wear during long shifts. Easy and Efficient Charging The KL8MS is rechargeable via USB, offering a convenient charging solution. With a charging time of only 5.5 to 10 hours, the lamp is quickly ready for use, minimizing downtime. Get Yours Today! Experience the superior performance and safety of the Wisdom KL8MS Corded Miner's Cap Lamp. Visit Provix at 3 Greengage Road, New Lowell, ON L0M 1N0, call us at +1 (888) 434-0253, or email sales@provix.net. For more information, visit our website at www.provix.net. Elevate your mining operations with the Wisdom KL8MS, your ultimate lighting solution.

Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results.

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Empowering the Oil and Gas Sector with Nulux’s Robust RF Communication Solutions Navigating through the complex and often unpredictable terrain of the oil and gas industry demands a communication infrastructure that is not only steadfast but also adaptive to the unique challenges this field brings. Nulux Network Solutions, leveraging its profound knowledge in wireless communication technology, stands at the forefront of providing Radio Frequency (RF) communication solutions that are not only reliable but also tailor-made for the intricacies of your operations. Breaking Through Boundaries with Nulux’s Wireless Proficiency With the mission of maintaining the momentum in fast-paced working environments, our team at Nulux ensures your operations are supported by wireless networks that are not only resilient and secure but also robust enough to cater to every spectrum of your business - from the office to the very heart of your field operations. The Power of Point-to-Point Networks A P2P network offers a dedicated communication pathway between two distinct points, providing a secure, reliable, and efficient medium for data transmission. Particularly for the oil and gas industry where data security is paramount, a P2P network safeguards your critical data, transmitting it securely across your private network, shielding it from potential external threats, and thereby ensuring the continuous and unhindered flow of information. Multipoint Networks: Connecting Every Operational Node Multipoint configurations, connecting more than two points via a shared line, are invaluable in scenarios demanding comprehensive centralized data access, ensuring every operational node is perpetually connected and synchronized, irrespective of the geographical disparities amongst them. Advantages at a Glance Increased Productivity: Ensuring the continuous availability of critical centralized files for every operational node, irrespective of geographical positioning. Robust Security: Through private networks, safeguarding your data against potential interception and ensuring it traverses securely across your operational matrix. Cost-Effective: When conventional hard-line connections are logistically or financially unviable, our wireless solutions present an economical alternative without compromising on functionality or reliability. Nulux’s RF Communication Solutions: A Beacon of Reliability in a Sea of Uncertainty Our commitment to staying ahead in the ever-evolving domain of wireless technology ensures your operations are always supported by state-of-the-art RF communication solutions. These solutions are not merely communication networks but are strategic assets, enhancing operational efficiency, safeguarding critical data, and ensuring every node of your operation is continuously and reliably connected. In the intricate and unpredictable realm of the oil and gas industry, ensuring the reliability, security, and efficiency of your communication networks is not merely beneficial but is paramount. Through Nulux’s RF communication solutions, your operations are not only empowered with robust communication networks but are also endowed with a strategic ally, ensuring your operational matrix is perpetually connected, your data transmissions are secure, and your communication networks are reliable and steadfast. Seamlessly integrate Nulux’s RF Communication Solutions into your operational matrix and ensure your operations are always connected, always secure, and perpetually empowered with robust and reliable communication networks. Connect with Nulux today and navigate through the complexities of the oil and gas sector with the assurance of robust, reliable, and secure communication networks.

Enhance Your Automotive Services with Alignment Equipment Leasing from CWB National Leasing Streamlining Your Vehicle Maintenance with Flexible and Efficient Equipment Solutions For automotive repair shops, dealerships, or service centers, having reliable and precise alignment equipment is crucial for providing top-notch vehicle maintenance services. Leasing alignment equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to enhance their service capabilities. Here’s how leasing alignment equipment can benefit your automotive business: 1. Quick Access to State-of-the-Art Equipment CWB National Leasing understands the importance of having the right tools for automotive services. They offer a rapid leasing process, typically making decisions within 48 hours of application submission. This efficiency means your alignment equipment can be delivered and operational quickly, minimizing downtime and enhancing your service offerings. 2. Increased Financial Flexibility Leasing alignment equipment with CWB National Leasing boosts your financial power. It allows you to conserve capital by opting for periodic payments over a significant initial purchase, freeing up resources for other essential business operations. The flexibility to add extra features or accessories to your equipment for a small payment increase enables customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term allow your alignment equipment to start contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial capacity. 5. Potential Tax Benefits Leasing alignment equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease alignment equipment through CWB National Leasing is a strategic decision that equips your automotive business with essential service tools while maintaining financial flexibility. It ensures access to advanced alignment equipment, vital for providing high-quality vehicle maintenance services, without the financial strain of a large upfront investment. This leasing approach enables enhanced service efficiency, improved customer satisfaction, and increased profitability, helping your automotive business to thrive in a competitive market.

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them.

Secure and Optimize Your Downhole Operations with HOCA Oil Tools' Check Set Tool In the intricate world of oil and gas exploration and extraction, securing and optimizing downhole components are pivotal for operational success and safety. HOCA Oil Tools, a leader in downhole slick line tool solutions, presents the Check Set Tool, an innovative product designed to ensure the correct setting and functionality of downhole locks and plugs. This specialized tool is an essential part of maintaining well integrity and efficiency, demonstrating our commitment to providing high-quality, reliable downhole solutions. HOCA’s Check Set Tool: Ensuring Downhole Safety and Efficiency The Check Set Tool by HOCA Oil Tools is engineered with precision, built to verify the accurate setting of lock mandrels and other downhole locking devices. Crafted from robust materials suited for the harsh downhole environment, this tool is designed for reliability and durability, ensuring that your downhole operations run smoothly and securely. Elevate Your Downhole Tool Setting with HOCA Oil Tools At HOCA Oil Tools, we understand the challenges and risks associated with downhole operations. Our Check Set Tool is a reflection of our dedication to innovation, quality, and customer service, offering a solution that addresses the critical need for secure and efficient downhole tool settings. Integrating the HOCA Check Set Tool into your downhole operations not only enhances operational security and efficiency but also demonstrates a commitment to the highest standards of well integrity and safety. Our experienced team is dedicated to supporting your operational success, providing tools and solutions that meet the demanding conditions of the oil and gas industry. Invest in the HOCA Check Set Tool and experience the confidence and efficiency that come with knowing your downhole components are correctly set and secured. Choose HOCA Oil Tools for all your downhole needs and join the ranks of satisfied customers who trust our products to keep their operations running smoothly and safely.

Introducing the Wisdom KL5MS MSHA Corded Miner's Cap Lamp – A New Standard in Mining Safety and Efficiency, Exclusively from Provix Provix is excited to unveil the latest addition to its range of high-quality mining equipment – the Wisdom KL5MS MSHA Corded Miner's Cap Lamp. This innovative product is not just a lighting solution; it's a commitment to safety, efficiency, and reliability in the demanding world of mining. Exceptional Lighting for Enhanced Safety Equipped with a powerful 7,800mAh battery, the KL5MS MSHA guarantees 13 hours of continuous lighting, ensuring that miners are never left in the dark. The main light LED, with a working voltage of 3.0V and current of 640mA, delivers a luminous flux of 340 lm. The impressive lighting degree of 18,000 lx at 1 meter enhances visibility significantly, making it a vital tool for miners. MSHA & ATEX M1 Certified for Maximum Safety The KL5MS MSHA goes above and beyond when it comes to safety. It is both MSHA (Mine Safety and Health Administration) and ATEX M1 certified, meeting the highest safety standards in the mining industry. This certification underscores our commitment to providing equipment that ensures the utmost safety of miners in potentially hazardous environments. Built to Last in Harsh Conditions Durability is a key feature of the KL5MS MSHA. The lamp has a main light lifespan of 50,000 hours and an auxiliary light lifespan of 40,000 hours. Its IP68 water-proof rating and explosion-proof design make it ideal for use in various mining conditions. Additionally, the battery life spans 1,200 cycles, ensuring long-term reliability. Ergonomically Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL5MS MSHA is designed for comfort. Its compact dimensions (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure it is not cumbersome, allowing for mobility and ease during long shifts. Efficient and Convenient Charging The KL5MS MSHA is as practical as it is powerful. It features a convenient USB charging system, enabling quick and easy recharging. The charging time of 4 to 7.5 hours ensures the lamp is ready for use with minimal downtime. Get Yours Today The Wisdom KL5MS MSHA Corded Miner's Cap Lamp is available now at Provix. Visit our website at www.provix.net, call us, or email for more information. Elevate your mining operations with the Wisdom KL5MS MSHA – where safety and efficiency meet.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Elevate Your Business Ambiance with Coffee Machine Leasing from CWB National Leasing Brewing Success with Advanced and Cost-Effective Beverage Solutions For businesses in the hospitality sector, offices, or any setting where offering a quality coffee experience is essential, having a top-notch coffee machine can significantly enhance customer satisfaction and employee morale. Leasing coffee machines through Canadian Western Bank (CWB) National Leasing presents a flexible, economical, and practical solution for businesses looking to upgrade their beverage services. Here’s how leasing coffee machines can benefit your business: 1. Swift Access to High-Quality Coffee Machines CWB National Leasing values the importance of enhancing your business ambiance and offers a rapid leasing process. With decisions typically made within 48 hours of application submission, your coffee machines can be delivered and operational quickly. This efficiency means you can start offering premium coffee experiences without significant delay, enhancing your customer service and workplace environment. 2. Enhanced Financial Power Leasing coffee machines with CWB National Leasing boosts your financial flexibility. It allows you to spread costs over manageable periodic payments rather than making a large upfront investment, freeing up capital for other key business needs. The option to add extra features or accessories to your coffee machines for a small payment increase allows for customization to meet your specific service requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your coffee machines start contributing to your business’s ambiance and productivity while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing coffee machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease coffee machines through CWB National Leasing is a strategic decision that equips your business with essential beverage equipment while maintaining financial agility. It ensures access to state-of-the-art coffee machines, vital for delivering high-quality coffee experiences, without the financial burden of a large upfront investment. This leasing approach enables enhanced customer satisfaction, improved employee well-being, and increased overall appeal of your business setting.

Achieve Precision and Perfection with the TIG AC/DC 201 Pulse D Welding Machine At Canaweld, we understand that precision and sleek design are paramount when it comes to welding in industries like marine, aerospace, and medical. That's why our wide range of TIG welders is meticulously designed to provide you with the utmost control necessary to achieve professional results with various parent metals. When excellence is your standard, trust Canaweld to deliver the welding solutions you need. Introducing the TIG AC/DC 201 Pulse D - Your Powerful Ally The TIG AC/DC 201 Pulse D stands as a powerful, portable, and versatile welding machine that embodies innovation and excellence. Capable of both AC and DC TIG welding on stainless steel, mild steel, and aluminum, as well as Stick welding, this unit offers unmatched versatility for welders who demand the best. The Pulse of Precision Welding The pulse features of the TIG AC/DC 201 Pulse D, combined with the HF start, make it the ultimate choice for welders seeking high-quality TIG welds, even on the thinnest materials, without any distortion. This machine sets new standards in welding performance, empowering you to tackle challenging projects with confidence and finesse. Exemplary Features for Superior Results The TIG AC/DC 201 Pulse D is equipped with an array of features that elevate your welding experience: • AC/DC capabilities, including all pulse parameters of a TIG welding machine, offering maximum versatility for various welding tasks. • Rigorously tested in (104°F/40°C) to ensure optimal performance even in the toughest conditions, so you can weld with confidence in any environment. • Excellent welding quality on aluminum, stainless steel, and other materials, providing professional-grade results every time. • The ability to weld very thin materials, especially aluminum, with precision and without compromising on quality. • Digital control of all welding parameters, including pre-flow, starting current, slope-up, welding current, base current, pulse duration, pulse frequency, slope-down, crater arc current, post-flow, AC frequency, AC balance, and more, giving you complete control over your welding process. • Generator compatible design for flexibility and adaptability in various worksites. • Excellent welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Digital ammeter and Hold Function of the last read value, ensuring accurate parameter monitoring and adjustment. • Automatic fan ensuring protection against overheating, saving energy, and keeping dust and debris away from the machine, enhancing its durability and performance. • Adjustable Arc Force in Stick mode, allowing you to fine-tune your welding experience for exceptional results. • Durable metal face panel, ensuring longevity and safeguarding your investment. Your Welding Excellence, Our Commitment At Canaweld, we stand by the quality and reliability of our products. That's why the TIG AC/DC 201 Pulse D comes with a comprehensive 3-year warranty, providing you with peace of mind and assurance in your welding endeavors. Elevate Your Welding Standards with Canaweld The TIG AC/DC 201 Pulse D is the epitome of precision and perfection in welding. Whether you work in the marine, aerospace, or medical industries or any other field where precision is crucial, this welding machine will exceed your expectations and deliver superior results. Invest in the welding machine that empowers you to achieve greatness. Choose the TIG AC/DC 201 Pulse D from Canaweld and experience welding like never before. Experience the pulse of precision welding and elevate your welding projects to new heights. Trust Canaweld for welding excellence. Make the TIG AC/DC 201 Pulse D your welding ally today. Unleash the power of precision welding with Canaweld.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Illuminating the Pathway to Enhanced Connectivity with Nulux: Pioneering Fiber Network Backbone Installation for the Oil & Gas Sector In the intricate labyrinth of the energy sector, wherein seamless data transmission forms the spinal cord of operational efficacy, establishing a robust, secure, and unfettered network backbone becomes imperative. At Nulux Network Solutions, our objective transcends beyond offering mere solutions; we are your partners in navigating through the convoluted pathways of data connectivity and communication within the oil and gas industry, ensuring that the artery of your operations pulsates with vigor, reliability, and sustainability. Sustaining the Future with Fiber Optics Nulux emerges as a beacon of sustainable advancements, offering an array of products, solutions, and services that cascade across the entirety of the energy value chain. We are steadfast in our commitment to guiding our partners in the oil and gas industry towards a future that not only resonates with sustainability but is also interwoven with technological prowess and innovation. Our Fiber Optic solutions symbolize this commitment, ensuring your journey towards a more sustainable future is always illuminated by the consistent, reliable, and efficient transmission of data. The Nulux Fiber Network Backbone Installation The oil and gas industry, characterized by its voluminous data generation, necessitates a network backbone that can shoulder the hefty demands of data transmission with unbridled efficiency and security. Our Fiber Network Backbone Installation service is not merely a technological provision but an embodiment of our expertise, experience, and dedication to ensuring your operations are always in sync with the digital pulse of the industry. Reliable Data Transmission: An uninterrupted flow of operational data is ensured, empowering your operations with real-time analytics, diagnostics, and vital decision-driving data. Fortified Security: Guarding your data against potential breaches and vulnerabilities with a fiber network that is securely fortified, ensuring a safe and secure environment for your data to traverse. Scalability: Our fiber network infrastructure scales in tandem with your operational expanse, ensuring that as your data demands burgeon, our network is always a step ahead in meeting those requirements with equal efficiency and reliability. A Tapestry of Operational Excellence Our Fiber Network Backbone Installation forms the intricate tapestry that interlaces your operational nodes, ensuring that the voluminous data generated is seamlessly integrated, conveyed, and utilized, forming the substrate upon which vital operational strategies and decisions are cultivated and realized. Safeguarding Your Data, Ensuring Its Journey is Unhindered At Nulux, we ensure that the conduit through which your data traverses is not merely operationally optimized but also securely shielded against potential cyber threats and vulnerabilities, fortifying your operational data against breaches and ensuring it navigates through a secure pathway. Join Hands with Nulux Embark on a journey where your operational data is not merely transmitted but is safeguarded, scrutinized, and utilized to shape a future wherein your operations echo with sustainability, operational excellence, and technological advancement. With our Fiber Network Backbone Installation, steer through the digital realms of the oil and gas industry with Nulux, where every bit of data, every decision, and every operational stride is backed by the stalwart reliability and security of our fiber-optic solutions. In a realm where data propels decisions, ensuring its secure, efficient, and unfettered transmission is paramount. Traverse with Nulux, where your data is not merely communicated but empowers your operations towards a future where every decision is data-driven, every operation is efficient, and your journey towards sustainability is continually illuminated by the steadfast glow of our solutions. Your journey towards an operationally efficient and sustainable future begins with Nulux. Let’s navigate through the digital corridors of the oil and gas industry together, ensuring your data navigates through the most secure, reliable, and efficient pathways, crafting a future where technology and sustainability converge to form a symphony of operational excellence. Let’s craft this future, together, with Nulux.

A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer