High Torque Super Spooler Unit

Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer.

A wireline entry guide is a device that is used to guide a wireline into a wellbore or oil and gas well. It is used to direct the wireline into the wellbore in a controlled manner.

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.

When it comes to accurate and reliable pressure measurement in demanding environments, the HDI 2000P Pressure Gauge System stands out as the ultimate solution. With its intrinsically safe, certified, solid-state electronic gauge, the 2000P provides exceptional performance and readability, regardless of lighting conditions. Unparalleled Durability and Versatility: Designed to withstand high vibration and rugged environments, the HDI 2000P excels where indication at the point of measurement is crucial. Whether it serves as a primary or secondary readout, this gauge system delivers unmatched performance in a wide range of applications. Expanded Pressure Ranges and Certifications: With pressure ranges of up to 20,000 psi for ATEX/IECEX certification and 16,000 psi for CSA certification (with 20,000 psi coming soon in 2023), the HDI 2000P accommodates various operational requirements. Rest assured, all HDI pressure equipment is rated within an impressive accuracy of 0.50% of full scale, ensuring precise measurements every time. Field-Proven and Reliable: Built on HDI's 30-year field-proven platform, the 2000P has a solid reputation for reliability and durability. Having been in the field for over 10 years, this gauge system has consistently demonstrated its ability to provide safety, accuracy, reliability, and low maintenance, making it the trusted choice of industry professionals. Tailored Configurations to Suit Your Needs: The HDI 2000P can be customized to meet the unique requirements of your application. With configurations available such as 4-20mA output (additional barrier required), 0-1 volt output, and slave or secondary displays, you can optimize the system to align seamlessly with your operational setup. Key Benefits and Features: • Battery-powered for convenience and portability • Field repairable system, ensuring minimal downtime • Low battery indicator for uninterrupted operation • Wide pressure range options, from 30 psi to 20,000 psi (kPa or bar available upon request) • Impressive 10 psi resolution for precise measurements • Multiple connection types, including 2" 1502, 2" 2001/2202, or flanged connections • Flexible output options with 4-20mA or 0-1 volt available • Solid-state platform with no fluids or moving parts, ensuring long-term reliability • Analog bar graph with a divided scale for clear visualization • Consistent performance in high vibration environments, maintaining accuracy in any condition • Simple interface for easy calibration, reducing maintenance efforts Experience the HDI Advantage: When you choose the HDI 2000P Pressure Gauge System, you gain access to unparalleled accuracy, durability, and versatility. Our commitment to delivering superior products is matched only by our dedication to exceptional customer service. Contact our knowledgeable team today to discuss your specific application and explore how the HDI 2000P can revolutionize your pressure measurement needs. Trust HDI for unmatched performance in even the most challenging environments. Houston Digital Instruments - Where Reliability Meets Precision

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Introducing the XOV Crossover Tool from Marlin Oil Tools: Your Solution for Seamless Downhole Connections Marlin Oil Tools is proud to offer the XOV Crossover Tool, a versatile downhole tool designed to facilitate the connection of two tools or pipes with differing threads, ensuring seamless integration within your Bottom Hole Assembly (BHA) during oil and gas operations. Engineered for adaptability, the XOV Crossover Tool is available in a wide range of designs, types, and sizes of threads to meet the diverse needs of the industry. Key Features of the XOV Crossover Tool: Versatile Thread Compatibility: Designed to connect components with different thread patterns, enhancing operational flexibility and efficiency. Customizable Design Options: Available in various designs and specifications, including multiple outer diameters and inner bore sizes, to perfectly match your operational requirements. Precision Engineering: Features precise thread codes for both internal (Box) and external (Pin) threads, ensuring reliable and secure connections. Rapid Customization Capability: Offers quick turnaround on customized tool designs upon client request, minimizing downtime and accelerating project timelines. Durable Construction: Built to withstand the harsh conditions of downhole environments, ensuring reliability and longevity of your tool assembly. Easy Integration: Seamlessly integrates into existing BHA configurations, providing a straightforward solution to connectivity challenges in the field. Maximize your downhole operational efficiency with the XOV Crossover Tool from Marlin Oil Tools, a leading solution for connecting downhole tools and pipes with varying thread types in the oil and gas industry. This highly adaptable crossover tool is engineered to offer precision, durability, and versatility, featuring customizable options for thread sizes, diameters, and designs to meet the specific needs of your operations. With its capability for rapid customization and reliable performance, the XOV Crossover Tool is the ideal choice for ensuring seamless connections and enhancing the integrity of your downhole tool assemblies. Choose Marlin Oil Tools for your crossover needs and experience the difference in quality and service. Why Choose the XOV Crossover Tool from Marlin Oil Tools? Operational Versatility: Ensures compatibility across a broad spectrum of downhole tools and pipe threads. Customization to Fit: Tailors to your specific operational needs with customizable designs and precise threading. Quick Response Time: Provides fast turnaround on custom requests, keeping your projects on schedule. Enhanced Connectivity: Guarantees secure and reliable connections, reducing the risk of operational issues. The XOV Crossover Tool by Marlin Oil Tools represents the cutting edge in downhole connectivity solutions, offering unparalleled adaptability, precision, and reliability for your oil and gas operations. Incorporate the XOV Crossover Tool into your tool assembly to achieve optimal performance and operational success.

The Super Spooler SUHT-25-2415 is designed for the heaviest of spooling loads in the most adverse conditions. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

Boost Your Construction Capabilities with Dozer Leasing from CWB National Leasing Empower Your Construction Projects with Flexible Equipment Solutions For any construction business, having the right equipment like dozers is essential for efficiency and success. Leasing your dozer through Canadian Western Bank (CWB) National Leasing provides a strategic and financially savvy solution that aligns perfectly with the needs of your construction projects. Here's why leasing a dozer through CWB National Leasing is a smart move for your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in the construction industry. They offer a streamlined leasing process, often approving applications within 48 hours. This means you can expect your dozer to be delivered and ready for use shortly after approval, reducing downtime and keeping your projects on schedule. 2. Enhanced Buying Power Leasing a dozer with CWB National Leasing boosts your purchasing capacity. It allows for periodic payments instead of a hefty initial investment, freeing up capital for other aspects of your business. Additionally, you can customize your dozer with extra features or accessories for a minimal increase in your payment, enhancing its functionality and efficiency. 3. Effective Cash Flow Management With manageable lease payments spread over the lease term, your dozer starts to contribute to your revenue even as you pay for it. This balanced approach helps maintain a healthy expense-to-revenue ratio, crucial for the financial health of your business. 4. Flexible Payment Structures CWB National Leasing offers payment plans that can be tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual options. This flexibility is especially beneficial for construction businesses, where income can vary based on project timelines and seasons. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments instead of depreciating the capital cost of the dozer. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your dozer through CWB National Leasing is a strategic decision that enables your construction business to utilize essential equipment while maintaining financial flexibility. It ensures that you have the necessary tools for your projects without the burden of a large upfront investment, paving the way for growth, efficiency, and profitability in the competitive construction sector.

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.65 meters (5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations.

Poseidon Robotics Introduces the Subsea Transformer: Taking Telemetry to New Depths In our unwavering commitment to advancing subsea robotics and ROV technology, Poseidon Robotics is thrilled to introduce our latest breakthrough: the Subsea Transformer. As part of our renowned Modular Telemetry System, this innovative subsea transformer assembly is set to redefine the capabilities of telemetry in deep-water operations. Unlocking New Possibilities At Poseidon Robotics, we understand the unique challenges faced by subsea professionals, and we continuously strive to provide solutions that exceed expectations. The Subsea Transformer is a testament to this dedication, offering a seamless integration of state-of-the-art components to empower your subsea missions. High Voltage Meets High Performance Designed with precision engineering and utilizing cutting-edge technology, our Subsea Transformer boasts a 3kV input and delivers an impressive 240VAC + HV motor output. This combination of high voltage and performance ensures efficient and reliable power distribution for your critical subsea operations. MacArtney Opto-Link Connectors The Subsea Transformer is equipped with MacArtney Opto-Link connectors, renowned for their robustness and reliability. These connectors ensure secure data transmission, minimizing the risk of signal loss and maintaining a seamless flow of information between your subsea equipment and surface systems. CWDM Technology To further optimize data transmission and maximize the potential of your subsea operations, our Subsea Transformer incorporates Coarse Wavelength Division Multiplexing (CWDM) technology. By enabling multiple signals to be transmitted over a single fiber optic cable, CWDM enhances the efficiency of your telemetry system, reducing cable requirements and streamlining your subsea setup. Unparalleled Integration The Subsea Transformer assembly is engineered to seamlessly integrate with our Modular Telemetry System, forming a powerful combination that is greater than the sum of its parts. This integration empowers you with a comprehensive telemetry solution, allowing you to focus on your subsea objectives without the distractions of technical complexities. Reliability and Performance You Can Trust When it comes to subsea operations, reliability is paramount. Poseidon Robotics has meticulously tested and validated the Subsea Transformer to ensure it performs flawlessly even in the harshest subsea environments. With our product, you can trust that your telemetry system will operate at peak performance, unleashing new possibilities for your subsea endeavors. Elevate Your Subsea Missions with Poseidon Robotics Discover a new era of subsea telemetry capabilities with Poseidon Robotics' Subsea Transformer. Whether you are exploring the depths of the ocean or conducting critical subsea inspections, our solution is here to support and enhance your operations. Contact Us Today To learn more about the Subsea Transformer and how it can elevate your subsea missions, contact Poseidon Robotics today. Our team of experts is eager to collaborate with you in shaping the future of subsea robotics and ROV technology. Embrace the power of innovation with Poseidon Robotics!

InWaTec Combined: Streamlining Wellbore Maintenance with Drive Down Bailer Services In the intricate world of well servicing, the importance of maintaining a clear and clean wellbore cannot be overstated. At InWaTec Combined, we understand the complexities of bailing operations, whether they are conducted on drilling rigs, during workover operations, or within production wells. That's why we are proud to offer our specialized Drive Down Bailer running services, providing a robust solution for the collection of solids and the overall cleansing of the wellbore environment, both onshore and offshore. Defining Bailing Operations with Excellence Bailing operations are essential for the upkeep of wellbore integrity, allowing for the efficient removal of debris that could potentially hinder well performance. InWaTec Combined's Drive Down Bailer services are meticulously designed to handle these operations with precision and reliability, ensuring that your wellbore remains free from obstructions that could impede operational success. Adaptable Services for Diverse Settings Our Drive Down Bailer services are versatile and adaptable, capable of being deployed in a variety of settings. Whether it’s the challenging offshore environment with its unique logistical demands or the accessibility of onshore operations, our services are tailored to meet the needs of the specific operation, ensuring the same high standards of quality and efficiency are maintained across all environments. Innovative Approach to Wellbore Cleaning InWaTec Combined utilizes the latest in bailing technology, equipping our Drive Down Bailers with the capacity to effectively collect and remove solids from the wellbore. Our approach to wellbore cleaning prioritizes not only the immediate removal of debris but also the long-term maintenance of the wellbore, ensuring continued productivity and reduced risk of downtime. Safety and Environmental Responsibility Recognizing the importance of safety and environmental stewardship, InWaTec Combined conducts all bailing operations with these as core priorities. Our Drive Down Bailer services are executed with the utmost attention to safety protocols, ensuring the well-being of all personnel involved, while also maintaining the integrity of the surrounding environment. InWaTec Combined: Your Trusted Partner in Well Servicing By choosing InWaTec Combined for your bailing needs, you are selecting a partner committed to delivering excellence. Our Drive Down Bailer running services are a reflection of our dedication to providing top-tier well servicing solutions that not only meet but exceed industry standards. We are dedicated to ensuring that your operations are carried out efficiently, safely, and with the highest degree of professionalism. Conclusion: Clearing the Path to Operational Excellence In conclusion, InWaTec Combined's Drive Down Bailer services offer a strategic advantage in well servicing operations. Our commitment to precision, adaptability, and safety ensures that we provide solutions that clear the path to operational excellence. Trust in the expertise and dedication of InWaTec Combined to keep your wellbore in optimal condition, ensuring the continued success and productivity of your well operations.

Elevate Your Textile Business with Embroidery Machine Leasing from CWB National Leasing Transforming Your Creative Ventures with Flexible and Cost-Effective Solutions In the dynamic world of textile and garment production, embroidery machines are pivotal for adding value and uniqueness to products. Leasing embroidery machines through Canadian Western Bank (CWB) National Leasing offers a strategic and financially astute solution for businesses looking to expand their embroidery capabilities. Here’s how leasing embroidery machines can enhance your textile business: 1. Rapid Equipment Access CWB National Leasing values the pace and efficiency of your business. They offer a fast and streamlined leasing process, with decisions typically made within 48 hours of application submission. This swift turnaround ensures that your embroidery machines can be delivered and operational quickly, keeping your production line active and efficient. 2. Enhanced Financial Flexibility Leasing embroidery machines with CWB National Leasing increases your purchasing power. Opting for periodic payments over a large upfront purchase helps free up capital for other crucial business operations. Additionally, the flexibility to add extra features or accessories to your machines for a small payment increase enables customization to meet your specific production requirements. 3. Effective Cash Flow Management With manageable lease payments spread over the term, your embroidery machines begin contributing to your business’s revenue while they are still being paid off. This approach helps maintain a healthy balance between expenses and revenue, which is essential for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing embroidery machines can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can positively impact your business’s tax position. Conclusion Choosing to lease embroidery machines through CWB National Leasing is a strategic decision that equips your textile business with advanced equipment while maintaining financial agility. It ensures access to state-of-the-art embroidery machines, vital for producing high-quality, detailed designs, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your business to thrive in the competitive textile industry.

Simplify Your International Business Finances with Dunbridge Financial: Unlocking the Advantage of Paying Invoices in Local Currency In the ever-expanding global market, businesses face the challenge of managing international transactions efficiently. At Dunbridge Financial, we understand the complexities involved in paying suppliers and the need for better pricing and foreign exchange advantage. Our Business Services are tailor-made to empower your business with seamless international payment solutions, helping you take your enterprise to new heights. Pay Invoices with the Foreign Exchange Advantage Paying invoices in local currency brings with it a host of benefits, including foreign exchange advantages and better pricing. With Dunbridge Financial, you gain access to a platform that simplifies your international business payments, allowing you to optimize your transactions and save on unnecessary costs. All Business Services Under One Roof At Dunbridge Financial, we believe in providing comprehensive solutions for your international business needs. Here's what we offer: 1. Open Your Free Global Business Account Within 24hrs Time is of the essence in the business world, and we value yours. With Dunbridge Financial, you can open your free global business account in just 24 hours, enabling you to jumpstart your international financial journey swiftly. 2. Concierge Customer Service We pride ourselves on embedding with our customers and understanding their unique needs. Each of our customers is assigned a dedicated account manager who collaborates closely with you to develop a customized payment strategy that aligns perfectly with your business objectives. Take the complexity out of your FX payment strategy and experience the utmost support and guidance. 3. Fast and Secure International Payments Speed and security are paramount when it comes to international payments. Our global banking relationships enable you to make cost-effective and secure transactions to over 100 currencies and 120 countries. We use a market-leading platform through our payment service partners, which is compliant with ISO27001, ensuring that your funds and data are in safe hands. 4. Multi-Currency Accounts, in Your Company's Name Managing multiple currency balances can be challenging, but not with Dunbridge Financial. Enjoy the convenience of real accounts in your company name, allowing you to receive like a local with IBAN, ACH, SEPA capabilities. Seamlessly transfer your funds between currencies as and when needed. 5. Mass Payments Simplify your accounts payable processes with Dunbridge Financial's mass payments feature. Upload, manage, and pay up to 1000 payees at a time, streamlining your financial operations and saving valuable time and effort. Join Us Today and Streamline Your International Business Finances Don't let complexities and uncertainties hinder your business growth. Join Dunbridge Financial today and experience the power of seamless international payments. Unlock the foreign exchange advantage, optimize your invoicing processes, and take your business to new heights on the global stage. Empower your international business with Dunbridge Financial. Sign up now and unlock a world of efficiency, security, and success. Simplify your international transactions and focus on what truly matters - the growth of your business.

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.

Introducing Poseidon Robotics' Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations Poseidon Robotics, a leading name in subsea robotics and ROV solutions, is proud to announce the launch of our latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. A Collaborative Breakthrough At Poseidon Robotics, collaboration and customer-centricity lie at the core of our values. We have worked closely with our esteemed partners at Blue Link and engaged with several SAR customers to develop the Large Aluminum Jaws. This joint effort ensures that our product aligns perfectly with the unique needs and challenges faced by search and rescue operators in subsea environments. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence When you choose Poseidon Robotics' Large Aluminum Jaws, you partner with a team dedicated to excellence and customer success. Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Poseidon Robotics' Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact Poseidon Robotics today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics with Poseidon Robotics!

Transform Your Perforation Operations with HOCA Oil Tools' Mechanical Tubing Perforator In the competitive landscape of the oil and gas industry, achieving precise, efficient, and cost-effective downhole operations is crucial. At HOCA Oil Tools, we understand these challenges and are committed to providing state-of-the-art solutions. Our Mechanical Tubing Perforator stands out as a pinnacle of innovation, specifically designed to enhance the efficiency and accuracy of perforation operations. HOCA’s Mechanical Tubing Perforator: Engineering Precision for Downhole Success The Mechanical Tubing Perforator by HOCA Oil Tools is meticulously engineered to provide precise and efficient perforations in tubing, essential for effective production and injection operations. Crafted from robust materials and designed to withstand harsh downhole environments, our Mechanical Tubing Perforator ensures optimal performance and reliability, delivering clean, precise perforations that enhance fluid communication and well productivity. Experience the HOCA Advantage in Downhole Perforation At HOCA Oil Tools, we pride ourselves on advancing the field of downhole operations with innovative, reliable, and cost-effective solutions. Our Mechanical Tubing Perforator is a testament to this commitment, offering a level of precision, efficiency, and safety that sets new industry standards. Incorporating the HOCA Mechanical Tubing Perforator into your downhole operations signifies a move towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a strategic partner dedicated to supporting your operational success with leading-edge solutions and comprehensive service. Choose HOCA Oil Tools' Mechanical Tubing Perforator for your downhole needs and join the ranks of industry leaders who trust our products to enhance their operations. Elevate your downhole operations with HOCA Oil Tools – where innovation, precision, and efficiency drive everything we do.

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer.

The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature