Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
New here? Sign up
Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
New here? Sign up
WR-SCSSSV FRN
Also known as:
wrscsssv, wrscssv, wr-scsssv, wireline retrievable safety valveBuy
Made to Order
Product
New
API
Air Freight
Title:
FRN Wireline Retrievable 5.5 inch Subsurface Safety ValveModel Number:
FRNAvailability:
Made to OrderDelivery Time (weeks):
3 weeksChoose
Midastream Supply Company in Airdrie
For product or service information, customizing, or other questions
Transaction Type
BuyCondition
NewWeight
less than 150 kgLocation
United StatesCompany Type
Product ProviderQuality Assurance
APIPrice
Request for Quote Based on specificationsMaterial
SteelBrand Name
HalliburtonShipping
Air FreightNotes
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface.C-1 Single Grip Invertible Packer
C-1 Baker PackerMidastream Supply Company in Airdrie
The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.
Buy
In Stock
Product
API
Sea Freight
Crossover for 3 1/2 inch JFE Bear tubing to 2 3/8 inch Hydril 533 tubing
Tubing Crossover for Premium ConnectionsMidastream Supply Company in Airdrie
Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee. A crossover is a one piece tubular section used to join or change two different components with different size of tube, or type of connection.
Buy
In Stock
Product
New
API
Sea Freight
2 3/8" L80 Yellowband Tubing Hydril 533
2 3/8 L80 TubingMidastream Supply Company in Airdrie
This connection is fully interchangeable with: Wedge 503® - 2.375 in. - 0.19 (4.70) in. (lb/ft) Wedge 533® - 2.375 in. - 0.218 (5.30) / 0.254 (5.95) / 0.295 (6.60) / 0.336 (7.45) in. (lb/ft) Wedge 563® - 2.375 in. - 0.19 (4.60) / 0.218 (5.10) / 0.254 (5.80) / 0.295 (6.60) / 0.336 (7.35) in. (lb/ft)
Buy
In Stock
Product
Used
API
Sea Freight
Midastream Supply Company in Airdrie
Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.
Buy
In Stock
Manufacturer
New
API
Sea Freight
Midastream Supply Company in Airdrie
The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer.
Buy
In Stock
Product
New
API
Sea Freight
Midastream Supply Company in Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
In Stock
New
2-3/8 inch Halliburton WellStar TR-SCSSSV
SCSSSV WellstarMidastream Supply Company in Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Surface Controlled Subsurface Safety Valve Tubing Retrievable Halliburton WellStar 4-1/2 inch
TR-SCSSV WellStarMidastream Supply Company in Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
O-rings and Gaskets for various applications including re-dress of downhole equipment
O-ringsMidastream Supply Company in Airdrie
An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.
Buy
In Stock
Product
New
API
Sea Freight
5.5 inch Depthstar Surface Controlled Subsurface Safety Valve
Depthstar 5.5Midastream Supply Company in Airdrie
Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Land Freight
Midastream Supply Company in Airdrie
The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Midastream Supply Company in Airdrie
Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery. Machines that use bearings include automobiles, airplanes, electric generators and so on.
Buy
Made to Order
Product
New
ISO
Sea Freight
Midastream Supply Company in Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
In Stock
Product
New
API
Air Freight
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
CWB National Leasing in Winnipeg
Supercharge Your Business with Leased Computers from CWB National Leasing Are you ready to take your business to the next level, boost productivity, and enhance your profits? Look no further—CWB National Leasing is your trusted partner for leasing computers. Here's why you should choose us: Get Your Equipment Fast In today's fast-paced business environment, access to the latest technology is crucial. At CWB National Leasing, we understand the urgency of getting the equipment you need promptly. When you apply for a computer lease with us, you can expect lightning-fast decision-making. How fast, you ask? We're proud to say that we typically notify your chosen equipment dealer that payment is on its way within just 48 hours of your approval. This means you can sit back and relax while your state-of-the-art computers are delivered to your doorstep. For more details on our approval turnaround times, check out our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your computer equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is essential for any successful business. When you lease computers with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your computers, they will start earning you money while you maintain a healthy balance between expenses and revenue. This approach makes it easy to ensure a favorable expense-to-revenue ratio, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your computer lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing computers through CWB National Leasing isn't just a smart business decision; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing computers with confidence. In conclusion, leasing computers with CWB National Leasing is the strategic choice for business owners who are serious about enhancing their operations, boosting productivity, and maximizing profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your computer leasing needs today!
Service
In Stock
Service
New
ISO
Lovat Gas Solutions in Edmonton
Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions.
Service
In Stock
Service
New
ISO
Land Freight
Eleks in Toronto
Embrace Sustainability: Redefine Energy Management with ELEKS As the world shifts towards renewable energy sources, forward-thinking organizations are taking the lead in creating a more sustainable future. With ELEKS' software development expertise, you can navigate the path to sustainable energy solutions and significantly reduce your direct carbon footprint. Our innovative solutions empower you to embrace environmentally-friendly practices, encourage climate change awareness, and streamline energy management practices—all while cutting costs and enhancing your operational efficiency. Pioneering Sustainability with ELEKS Energy Software Development: Unlock the potential of an advanced energy management software solution that transforms your business power system into a beacon of sustainability, productivity, accessibility, and safety. Investment in Sustainable Energy Solutions: Our software development expertise guides you in making strategic investments in sustainable energy solutions, such as electric vehicles powered by emerging technologies. Join the ranks of industry leaders committed to building a greener future. Environmentally Friendly Energy Consumption: Cultivate a culture of environmentally-friendly energy consumption within your organization. Our solutions empower you to lead by example and inspire others to adopt sustainable practices. Climate Change Awareness: By embracing sustainable energy solutions, you're not only reducing your carbon footprint but also raising climate change awareness within your industry. Be a catalyst for positive change and inspire others to follow suit. Reduced Costs and Streamlined Practices: Sustainability doesn't just benefit the environment—it also benefits your bottom line. Our solutions help you streamline energy management practices, optimize processes, and reduce operational costs. ELEKS: Your Partner in Sustainability Decades of Expertise: With 30 years of experience in custom software development, ELEKS is a trusted partner in helping energy producers, distributors, and organizations optimize energy efficiency and drive sustainability. Cutting-Edge Solutions: Our software team is at the forefront of innovation, utilizing Cloud, IoT, blockchain, drones, and other cutting-edge technologies to design bespoke data-driven software solutions and energy management systems. Addressing Industry Challenges: We understand the unique challenges faced by the energy and utility industry. Our solutions are tailored to address the specific needs of various energy sources, facilities, and businesses. Embrace the Green Revolution with ELEKS ELEKS' software development expertise is your gateway to a sustainable future. By adopting eco-friendly energy solutions, you're not only reducing your carbon footprint but also contributing to a more sustainable world. Lead the way in your industry, inspire change, and partner with ELEKS to redefine energy management for a brighter future.
Service
Made to Order
Service
New
ISO
Grid Dirt Construction in Red Deer
Precision Performance to Drive Costs Down and Profitability Up The Cat® MD6310 drill rig is a powerful, flexible tool that can help you get the most out of your drilling operation. It offers a wide variety of features and options designed to meet your site’s specific needs and challenges, with an updated cab that keeps operators safe and comfortable while increasing performance and productivity. Infused with the latest technologies, the MD6310 not only increases productivity and allows for automated drilling, but also improves the efficiency of all downstream operations. Designed to drill holes from 203-279 mm (8-11 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes.
Buy
Currently in Use
Distributor
New
ISO
Land Freight
CWB National Leasing in Winnipeg
Enhance Your Automotive Services with Alignment Equipment Leasing from CWB National Leasing Streamlining Your Vehicle Maintenance with Flexible and Efficient Equipment Solutions For automotive repair shops, dealerships, or service centers, having reliable and precise alignment equipment is crucial for providing top-notch vehicle maintenance services. Leasing alignment equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to enhance their service capabilities. Here’s how leasing alignment equipment can benefit your automotive business: 1. Quick Access to State-of-the-Art Equipment CWB National Leasing understands the importance of having the right tools for automotive services. They offer a rapid leasing process, typically making decisions within 48 hours of application submission. This efficiency means your alignment equipment can be delivered and operational quickly, minimizing downtime and enhancing your service offerings. 2. Increased Financial Flexibility Leasing alignment equipment with CWB National Leasing boosts your financial power. It allows you to conserve capital by opting for periodic payments over a significant initial purchase, freeing up resources for other essential business operations. The flexibility to add extra features or accessories to your equipment for a small payment increase enables customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term allow your alignment equipment to start contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial capacity. 5. Potential Tax Benefits Leasing alignment equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease alignment equipment through CWB National Leasing is a strategic decision that equips your automotive business with essential service tools while maintaining financial flexibility. It ensures access to advanced alignment equipment, vital for providing high-quality vehicle maintenance services, without the financial strain of a large upfront investment. This leasing approach enables enhanced service efficiency, improved customer satisfaction, and increased profitability, helping your automotive business to thrive in a competitive market.
Service
In Stock
Service
New
ISO
AV Annulus Safety Valve 9-5/8 inch
Annulus ValveMidastream Supply Company in Airdrie
The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature
Buy
Made to Order
Product
New
API
Sea Freight
Hoca Oil Tools in Zwartemeer
Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Provix in New Lowell
Maximize Your Mining Equipment's Performance with the Wisdom NWB-25A Charger from Provix Provix is proud to introduce the Wisdom NWB-25A Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This advanced charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Universal Compatibility and High Efficiency The NWB-25A Charger is versatile and adaptable, with AC input compatibility ranging from AC 100-240V +/- 10%, 0.3A, 50-60 Hz, ensuring it can be used in various locations around the world. It also features a DC input of 7~30 V, 1.7 A, making it suitable for a wide range of applications. Optimized Charging for Wisdom Equipment Designed to work seamlessly with Wisdom's range of mining lamps, the NWB-25A offers a maximum DC output voltage of 4.56 ± 0.05 V and a DC output current of 2400 mA ± 100 mA. This ensures fast and efficient charging times: 5 hours for the KL8M, 4-5 hours for the KL5M, and 6 hours for the KL12M, minimizing downtime and enhancing productivity. Global Standards Compliance The NWB-25A Charger is equipped with AC plugs that conform to US, EU, UK, or AU standards, catering to different markets and ensuring compliance with global electrical standards. This feature makes the NWB-25A ideal for mining companies operating in multiple countries. Compact and Lightweight Design With its compact size (116 x 76 x 56 mm; 4.6 x 3.0 x 2.2 in) and light weight (215 g; 7.58 oz), the NWB-25A is highly portable, easy to transport, and convenient to use in various settings, from mining sites to office environments. Enhance Your Charging Experience The Wisdom NWB-25A Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit www.provix.net or contact our expert team.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Sivam S.p.A. in Spoltore
The Sivam Hybrid Downhole Pump is a rod pump that utilises the existing tubing as the pump barrel. The standing valve is installed first in a tubing profile, and the travelling assembly is then installed. Dual barrier options such as the Rod Sentinel can also be installed and recovered using the Hybrid Downhole pump. The Hybrid Downhole Pump increases fluid production by maximizing rod pump barrel size, and installation costs are minimised by being through-tubing installable. An excellent choice for well testing existing completions that do not have artificial lift installed. When used in conjunction with the Rod Sentinel SCSSV the Hybrid Downhole Pump is capable of dewatering gas wells, rod pumping critical sour wells, or for installation on lower rate offshore wells.
Buy
In Stock
Manufacturer
New
API
Air Freight
Hoca Oil Tools in Zwartemeer
Transform Your Perforation Operations with HOCA Oil Tools' Mechanical Tubing Perforator In the competitive landscape of the oil and gas industry, achieving precise, efficient, and cost-effective downhole operations is crucial. At HOCA Oil Tools, we understand these challenges and are committed to providing state-of-the-art solutions. Our Mechanical Tubing Perforator stands out as a pinnacle of innovation, specifically designed to enhance the efficiency and accuracy of perforation operations. HOCA’s Mechanical Tubing Perforator: Engineering Precision for Downhole Success The Mechanical Tubing Perforator by HOCA Oil Tools is meticulously engineered to provide precise and efficient perforations in tubing, essential for effective production and injection operations. Crafted from robust materials and designed to withstand harsh downhole environments, our Mechanical Tubing Perforator ensures optimal performance and reliability, delivering clean, precise perforations that enhance fluid communication and well productivity. Experience the HOCA Advantage in Downhole Perforation At HOCA Oil Tools, we pride ourselves on advancing the field of downhole operations with innovative, reliable, and cost-effective solutions. Our Mechanical Tubing Perforator is a testament to this commitment, offering a level of precision, efficiency, and safety that sets new industry standards. Incorporating the HOCA Mechanical Tubing Perforator into your downhole operations signifies a move towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a strategic partner dedicated to supporting your operational success with leading-edge solutions and comprehensive service. Choose HOCA Oil Tools' Mechanical Tubing Perforator for your downhole needs and join the ranks of industry leaders who trust our products to enhance their operations. Elevate your downhole operations with HOCA Oil Tools – where innovation, precision, and efficiency drive everything we do.
Buy
In Stock
Product & Service
New
API
Air Freight
Eleks in Toronto
ELEKS: Empowering Energy Sector Transformation with Blockchain Solutions In the dynamic landscape of the energy sector, innovation isn't just a trend – it's a necessity. ELEKS, as a trailblazer in software engineering, brings to the table a game-changing proposition that holds the potential to reshape the energy industry: blockchain-powered business solutions. Through our deep-rooted energy sector technology expertise, we're introducing a new era of possibilities that redefines data management, transparency, security, and efficiency. Here's a glimpse into how ELEKS can be your partner in harnessing the full potential of blockchain technology for unparalleled growth: Empower Data Management: Blockchain technology is a game-changer in data management. ELEKS' solutions enable energy companies to handle data with unprecedented efficiency, accuracy, and security. Asset Ownership Tracking: Say goodbye to ambiguity. Our blockchain-powered solutions provide a foolproof system for tracking asset ownership, ensuring transparency and accountability. Swift and Secure Transactions: Energy trading just got a whole lot smarter. ELEKS leverages blockchain to facilitate quick and secure settlement and recording of transactions, eliminating intermediaries and streamlining processes. Elevated Business Transparency: Transparency is no longer a challenge. Our blockchain solutions bring transparency to the forefront, ensuring all stakeholders have access to real-time, tamper-proof data. Auditability Redefined: Auditing becomes a breeze. ELEKS' blockchain solutions offer auditability beyond comparison, giving regulatory bodies instant access to secure and tamper-proof energy data. Unprecedented Security: Security isn't an option; it's a mandate. Our solutions empower energy companies to maintain robust security protocols, ensuring data integrity and mitigating risks. Regain Control: Ownership with control. Our blockchain-powered solutions allow data source owners to maintain complete control over security and accessibility, reinforcing trust and control. Efficiency Unleashed: Efficiency is the heart of our solutions. By eliminating intermediaries and enhancing data accuracy, we drive efficiency to new heights. Data-Driven Decision Making: Make informed decisions, backed by reliable data. ELEKS' solutions equip energy companies with accurate and real-time insights, facilitating data-driven strategies. ELEKS: Your Path to Energy Innovation ELEKS isn't just a service provider; we're your innovation enabler. With our energy sector technology expertise, we're not just implementing blockchain solutions – we're rewriting the energy sector narrative. Our goal is to empower energy companies with the tools they need to thrive in a data-centric world. Embrace a future where blockchain technology shapes your energy operations, revolutionizing data management, transparency, and efficiency. With ELEKS by your side, the possibilities are limitless, and your journey towards energy innovation is destined for success.
Service
Made to Order
Service
New
ISO
Cleanstream B.V. in Ter Apel
As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials.
Service
In Stock
Service
New
ISO
Land Freight
ID OILTOOLS B.V. in Oudkarspel
Introducing the revolutionary slim design composite plug from ID OILTOOLS – the "Long Range" Composite Frac Plug! With its advanced engineering, this plug is designed to pass through damaged casing, restricted internal casing diameters, and existing casing patches in the wellbore. Now, you can get more from every investment with this cost-effective option for both vertical and horizontal wells. The "Long Range" plug features a unique pump-down element design that requires less fluid and pump pressure to deploy the plug horizontally. It is made with better materials for better results, incorporating composite material and aluminum construction. This makes it possible for wells previously marked for abandonment to be re-completed, increasing overall production and profitability. Our composite frac plug can be configured as a Ball Drop or Bridge Plug, and it can be deployed on wireline or coiled tubing. Its dependable cast iron slips secure the plug in place, and the positive lock-up feature ensures lock-up of multiple plugs in a single wellbore. Plus, custom O.D. is available upon request. Don't miss out on this patented technology that has already proven its success. Choose ID OILTOOLS for the Long Range Composite Frac Plug and experience the next level of downhole solutions.
Buy
In Stock
Product
New
API
Sea Freight
CWB National Leasing in Winnipeg
Enhance Business Continuity with Leased Uninterrupted Power Supply (UPS) Solutions from CWB National Leasing Is your business ready to ensure uninterrupted operations and safeguard against power disruptions? Look no further than CWB National Leasing for all your Uninterrupted Power Supply (UPS) leasing needs. Here's why leasing UPS equipment with us is the right choice: Get Your UPS Equipment Fast At CWB National Leasing, we understand the critical importance of maintaining uninterrupted operations. When you apply for a UPS equipment lease with us, you can count on a swift decision-making process. We take pride in our rapid response times—typically, within just 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your UPS equipment is promptly delivered and installed. For more details on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase of UPS equipment, consider the benefits of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your UPS equipment with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your UPS solution to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease UPS equipment with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay for your UPS equipment, it will start earning you money by protecting your operations from power disruptions. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your business's continuity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your UPS equipment lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing UPS equipment through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing UPS equipment with confidence. In conclusion, leasing UPS equipment with CWB National Leasing is the strategic choice for business owners determined to ensure business continuity, reduce costs, and increase profitability. From rapid equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your business's continuity; choose CWB National Leasing for all your UPS equipment leasing needs today!
Service
In Stock
Service
New
ISO
Canaweld Inc. in Vaughan
Introducing the Revolutionary MIG Gun M250 Series: Your Ultimate Welding Companion When it comes to heavy-duty, durable, and high-performance MIG guns, look no further than the Canaweld M250 Series. Crafted with precision and innovation, this newly designed MIG gun sets a new standard in the welding industry. Engineered to meet the demands of the oil and gas industry, the M250 Series will transform the way you weld, offering unmatched versatility, comfort, and efficiency. Built for Excellence - Unleash the Power of Adaptability The M250 MIG gun boasts a unique and cutting-edge feature that sets it apart from the rest - the ability to convert termination styles seamlessly. With a simple replacement, you can switch between Euro style, Lincoln® style, Tweco® style, or Miller® style, ensuring compatibility with various welding machines. This adaptability makes the M250 Series a true game-changer for welders, offering unmatched flexibility in their welding projects. Unrivaled Features - Mastering Welding Precision Let's dive into the exceptional features of the Canaweld M250 Series: 1. Knuckle Joint: Experience improved balance and position-ability as the handle and neck move independently of the cable assembly. Weld with greater precision and control. 2. Durable Cable: The M250 MIG gun boasts excellent heat, abrasion resistance, and flexibility in its cable. It's lighter than standard cable sets and can withstand over 1 million flexes in life testing, ensuring it stands the test of time. 3. Premium Contact Tips: Crafted from premium grade copper alloys, the contact tips are extremely durable, offering superior performance and efficiency. 4. High-Quality Accessories: Choose from a range of durable and high-performance options for tip adaptors, diffusers, and swan necks, tailoring your MIG gun to suit your specific needs. 5. Ergonomic Handle Design: Enjoy comfortable handling with the ergonomic design of the handle, reducing welder fatigue and promoting longer welding sessions. 6. Air Gap Technology: The M250 MIG gun utilizes air gap technology for cooler running handles and better heat transfer isolator from the swan neck, ensuring efficient and effective welding. 7. Versatile Liner: The steel and combo liner cater to all types of wires, including steel (metalcore and flux-cored), stainless steel (metalcore and flux-cored), and aluminum, making it suitable for a wide range of welding applications. 8. Effective Sealing: The unique sealing ring ensures effective sealing of impurities, particularly in the argon gas process, promoting cleaner welds. 9. Push-on Nozzle System: Easily adjust nozzle stick-out with the push-on nozzle system, streamlining your welding workflow. 10. High-Quality Trigger: The M250 MIG gun comes with a high-quality trigger that boasts a life expectancy of over 1 million cycles, offering durability and reliability in every weld. Elevate Your Welding Experience with Canaweld M250 Series At Canaweld, we strive to empower welders with the latest advancements in welding technology. The M250 Series is a testament to our commitment to excellence, providing welders with a powerful, versatile, and comfortable welding solution. Experience the future of welding with the Canaweld M250 Series - Your Ultimate Welding Companion!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Message:
To: supplier
Canaweld Inc. in Vaughan
Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Poseidon Robotics in Chandler
Unleash the Grasping Power of Your ROV: Introducing Poseidon Robotics' Custom ROV Grabber Jaws At Poseidon Robotics, we believe that no underwater mission is too challenging when you have the right tools at your disposal. That's why we are thrilled to introduce our latest innovation - Custom ROV Grabber Jaws. Designed to enhance the capabilities of your ROV, these specialized jaws are engineered to conquer the depths and tackle a wide range of subsea tasks with ease and precision. Tailored Precision for Your Unique Needs We understand that every subsea operation comes with its own set of requirements and challenges. Our Custom ROV Grabber Jaws are meticulously tailored to address your specific needs, ensuring that your ROV has the perfect gripping solution for any situation. Whether you're involved in search and rescue (SAR) missions, industrial inspections, scientific research, or archaeological explorations, our jaws are built to optimize your ROV's performance. Seamless Integration with Your ROV System Compatibility and ease of integration are vital in the world of subsea robotics. Our Custom ROV Grabber Jaws are designed to seamlessly attach to your existing ROV system, eliminating any hassle during setup and enabling you to get to work quickly. With our precision engineering, the jaws fit perfectly, ensuring a secure and reliable connection, so your ROV can perform flawlessly even in the most demanding environments. Built for Reliability and Durability The harsh conditions of the underwater world demand robust and dependable equipment. Our Custom ROV Grabber Jaws are crafted from high-quality materials, making them corrosion-resistant and capable of withstanding the rigors of subsea missions. Count on Poseidon Robotics' jaws to be your reliable partner, offering consistent performance, mission after mission. Versatile Grasping Solutions No matter the size or shape of the objects you need to handle, our Custom ROV Grabber Jaws are up to the task. From delicate marine samples to heavy equipment retrieval, our jaws are designed for versatility. The advanced engineering ensures that your ROV can grip, hold, and maneuver objects with precision, providing you with the flexibility you need to execute your tasks efficiently. The Poseidon Robotics Advantage As industry leaders in subsea robotics, Poseidon Robotics has a proven track record of delivering cutting-edge solutions to the underwater exploration community. With our Custom ROV Grabber Jaws, we continue to set new standards for innovation, performance, and reliability. Experience the Power of Customization Don't let the limitations of off-the-shelf tools hold back your ROV's potential. Embrace the power of customization with Poseidon Robotics' Custom ROV Grabber Jaws. Our team of experts is ready to collaborate with you, understanding your specific requirements, and crafting the perfect solution that empowers your ROV to achieve extraordinary feats beneath the waves. Upgrade Your ROV Today Discover the limitless possibilities of subsea exploration with Poseidon Robotics' Custom ROV Grabber Jaws. Reach out to us now to explore how our innovative solutions can take your underwater missions to new depths of success. With Poseidon Robotics by your side, there's no limit to what your ROV can accomplish.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Midastream Supply Company in Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
In Stock
Product
Used
API
Sea Freight
Well Servicing Pipe Wrenches for torquing tubulars and downhole tools
48 inch Heavy-Duty Straight Pipe WrenchThe adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose!
Buy
In Stock
Product
New
ASME
Sea Freight
Marlin Oil Tools in Calgary
Introducing the WNZ Wash Nozzle from Marlin Oil Tools: The Ultimate Solution for Efficient Well Cleanout Operations Marlin Oil Tools proudly presents the WNZ Wash Nozzle, a specialized downhole tool engineered for superior well intervention and cleanout operations. As an integral component of the Bottom Hole Assembly (BHA), the WNZ Wash Nozzle is designed to enhance the efficiency of well cleanouts by utilizing high-speed jets to break up and remove dense deposits from the wellbore. Key Features of the WNZ Wash Nozzle: High-Speed Jet Technology: The WNZ Wash Nozzle features nozzles that restrict cleanout fluid passage, thereby increasing the speed of the jet for effective deposit removal. Customizable Flushing Options: Offers the flexibility to customize the number, direction, and inner diameter of flushing holes to meet specific operational needs, ensuring targeted cleanout. Seamless BHA Integration: Designed to run as part of the BHA, the WNZ Wash Nozzle seamlessly integrates into well intervention workflows. Efficient Deposit Breakup: The high-speed jet mechanism is specifically engineered to break up dense deposits, making cleanout operations more efficient. Rapid Customization Capability: Marlin Oil Tools responds quickly to client requests for customized tool designs, ensuring minimal downtime and optimal tool performance. Versatile Application: Suitable for a wide range of well intervention cleanout tasks, the WNZ Wash Nozzle enhances operational flexibility and effectiveness. Elevate your well intervention and cleanout strategies with the WNZ Wash Nozzle from Marlin Oil Tools, a cutting-edge solution designed to optimize wellbore cleaning in the oil and gas industry. Leveraging high-speed jet technology, the WNZ Wash Nozzle efficiently breaks up and removes dense deposits, ensuring a clean wellbore conducive to optimal production and operational safety. With customizable flushing options and seamless BHA integration, the WNZ Wash Nozzle offers unparalleled flexibility and efficiency in well cleanout operations. Opt for Marlin Oil Tools’ WNZ Wash Nozzle for targeted, efficient, and customizable wellbore cleaning solutions. Why Choose the WNZ Wash Nozzle from Marlin Oil Tools? Targeted Cleaning Efficiency: Achieves superior cleanout performance with customizable high-speed jets. Customization to Suit Needs: Tailored flushing options provide precise control over cleanout operations. Enhanced Operational Flexibility: Adapts to various well conditions and cleanout requirements, improving operational outcomes. Quick Turnaround on Custom Designs: Marlin Oil Tools’ rapid customization process ensures tools are optimized for your specific operational needs. The WNZ Wash Nozzle by Marlin Oil Tools represents the forefront of downhole cleanout technology, providing operators with a powerful tool for maintaining well integrity and enhancing productivity. Incorporate the WNZ Wash Nozzle into your well intervention toolkit for cleaner, more efficient, and customized wellbore cleaning operations.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Air Freight
EnviroBlu 4 Litre Industrial Cleaner
EnviroBlu Cleaner and DegreaserMekapisk EnviroBlu Solutions Inc. in St. John’s
Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Tubing Cutter / Drill Pipe Cutter
Tubing CutterID OILTOOLS B.V. in Oudkarspel
Introducing Tubing Cutter / Drill Pipe Cutters from ID Oiltools - the perfect solution to quickly and effectively sever tubing during the removal of stuck pipe. Our Tubing Cutters are designed to handle the toughest situations when tubing becomes stuck in the well. To achieve maximum performance, we recommend choosing the cutter with the largest possible diameter that can run in the well. Our Tubing Cutter / Drill Pipe Cutters are air shippable at Class 1.4D and conform to API RP-67, ensuring that you receive a reliable and safe product. To maximize the effectiveness of the tool, our cutters should be centralized and run in recommended applications. Don't let stuck tubing slow down your operations - trust ID Oiltools Tubing Cutter / Drill Pipe Cutters to provide a quick and efficient solution. Contact us today to learn more about how we can help you overcome the toughest challenges in your well operations.
Buy
In Stock
Product & Service
New
API
Sea Freight
Midastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
Made to Order
Product
New
API
Air Freight
Currency Management of Foreign Investments
Foreign Exchange For Investment PropertyDunbridge Financial in Oakville
Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.
Service
Made to Order
Service
New
ISO
Air Freight
Circulating Type Chokes for Nipples
Downhole ToolsHoca Oil Tools in Zwartemeer
HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Marlin Oil Tools in Calgary
Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Energy Distribution Management
Software DevelopmentEleks in Toronto
ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.
Service
In Stock
Service
New
ISO
HDI 3200 MGS Differential Monitoring System
Mud Gas MonitorHouston Digital Instruments in Houston
Ensure precise monitoring of liquid seal pressure, mud gas pressure, and mud temperature with the advanced HDI 3200 MGS Differential Monitoring System. Designed as a stand-alone, battery-powered solution, this monitoring system is specifically engineered to provide accurate readings and reliable performance in the most demanding environments. Unparalleled Accuracy and Reliability: At HDI, accuracy and reliability are at the core of everything we do. The HDI 3200 MGS system utilizes field-proven HDI Gauges, renowned for their precision and durability. With our system, you can trust that your pressure and temperature measurements are accurate and dependable, empowering you to make informed decisions and maintain optimal operational control. Detailed Monitoring and Differential Readings: The HDI 3200 MGS system goes beyond basic pressure and temperature measurements. It offers the unique capability to monitor the differential pressure between liquid seal and mud gas pressures, providing valuable insights into your well conditions. By accurately measuring the differential, you can gain a deeper understanding of the dynamics within your system, enabling you to make timely adjustments and optimize performance. Alternate Engineering Units for Versatile Applications: Flexibility is key in any monitoring system. With the HDI 3200 MGS, you can easily switch between engineering units to suit your specific needs. Whether you prefer PSI increments or an alternative unit of measurement, our system accommodates your requirements, ensuring compatibility with your existing workflows and standards. Seamless Integration and Secondary Output: The HDI 3200 MGS system offers seamless integration with local and remote visual displays, providing you with the flexibility to monitor and track readings from different locations. Additionally, the system features a 4-20mA secondary output, allowing for easy integration with other monitoring systems or data acquisition devices. This enables you to centralize your data and streamline your monitoring processes for enhanced efficiency. Depend on Houston Digital Instruments: With a legacy of excellence in measurement and control solutions, Houston Digital Instruments is a trusted partner in the industry. Our commitment to accuracy, reliability, and safety shines through in every product we develop. The HDI 3200 MGS Differential Monitoring System is a testament to our dedication to providing innovative solutions that meet the evolving needs of our customers. Experience the power of precision monitoring. Contact our knowledgeable team today to discuss your specific requirements and discover how the HDI 3200 MGS can revolutionize your operations. Trust Houston Digital Instruments for accurate, reliable, and efficient monitoring solutions. Where Precision Meets Performance - HDI, your partner in measurement excellence.
Buy
In Stock
Manufacturer
New
API
Air Freight
InWaTec Combined in Vechta
InWaTec Combined: Ensuring Well Integrity with Advanced Pulling and Setting SCSSV Services The oil and gas industry faces the critical challenge of maintaining well integrity for uninterrupted production. At InWaTec Combined, we understand the importance of robust well operations, and our Pulling and Setting Surface Controlled Subsurface Safety Valve (SCSSV) services are at the forefront of addressing this challenge. Revolutionizing DHSV Repair A malfunctioning Downhole Safety Valve (DHSV) can halt production and compromise well integrity, making timely and efficient repairs crucial. Our services are meticulously designed to repair Tubing Retrievable Subsurface Safety Valves (TRSSSV), a process that not only restores well integrity but also resumes production swiftly. By repairing TRSSSVs, we circumvent the need for lock open operations, avoiding the necessity of installing a Wireline Retrievable Subsurface Safety Valve (WRSSSV) which could potentially restrict production flow. Optimized Repair Techniques Conventional repair methods are often time-consuming and costly, requiring extensive workover operations. InWaTec Combined’s approach replaces these outdated methods with cutting-edge techniques that save time and reduce costs. Our expertise in pulling and setting SCSSVs ensures that if a TRSSSV's functionality and integrity cannot be restored, it can be locked open efficiently. We then install a WRSSSV, which is a strategic move that prevents the need for a complex workover, thereby optimizing the repair process. Maintaining Peak Performance The ability to swiftly switch from a TRSSSV to a WRSSSV without a full workover is a game-changer in well service operations. It minimizes downtime and ensures that wells can continue to operate at peak performance levels. Our dedicated teams are equipped with the latest technology and have the expertise to execute these operations seamlessly, ensuring minimal disruption to your production schedules. A Partner in Well Integrity At InWaTec Combined, we pride ourselves on being your trusted partner in maintaining well integrity. Our Pulling and Setting SCSSV services are not just about repairs; they are about providing a comprehensive solution that safeguards your operations against future integrity issues. With our advanced techniques and committed service, we guarantee that your wells remain productive, secure, and profitable. In conclusion, InWaTec Combined is dedicated to providing superior service in the repair and maintenance of SCSSVs. Our innovative approach is designed to keep your wells functioning smoothly, ensuring that well integrity is not just restored but fortified. Trust us to be the guardians of your well's safety and productivity.
Service
In Stock
Service
New
API
Land Freight
Safe-T-Whip Installation Training
Restraint TrainingEmpowering Your Team with Installer Training and Certification At Safe-T-Whip & Restraints Inc., safety is at the heart of everything we do. We believe that a well-trained and qualified workforce is the cornerstone of a safe and successful oilfield operation. That's why we offer comprehensive On-Site Qualified Installer Training and Certification programs to ensure that your team is equipped with the knowledge and skills they need to handle our safety restraints with confidence. Comprehensive Training, Complete Confidence: Our training program covers all the essential aspects of Safe-T-Whip usage, maintenance, and safety procedures. We leave no stone unturned, ensuring that your team is well-versed in all the critical elements of working with our safety restraints. Topics Covered: During our training sessions, your team will learn about: • Proper use of Safe-T-Whip restraints to ensure maximum safety and effectiveness. • Tags and identification for easy recognition and compliance with safety protocols. • Inspection techniques to identify any potential issues or concerns. • Proper installation and use of anchor points for secure and reliable restraint. • Maintenance and cleaning procedures to keep the restraints in optimal condition. • Leak repair measures to address any unforeseen incidents promptly. • Annual inspection practices to maintain the highest safety standards over time. Certified for Success: After completing our comprehensive training program, your team members will receive certification, recognizing their proficiency and qualification as Safe-T-Whip installers. This certification is a testament to their commitment to safety excellence and adherence to industry best practices. On-Site Convenience: We understand that your operations may have specific needs and challenges. That's why we bring the training directly to your site, ensuring convenience and relevance for your team. Our expert trainers will work with your personnel, addressing site-specific concerns and scenarios to ensure practical application of the training. Safety First, Always: With Safe-T-Whip Installer Training and Certification, you can be confident that your team is prepared to prioritize safety in every aspect of their work. From installation and inspection to maintenance and repair, our training equips your team with the expertise they need to create a safer work environment for everyone. Choose Safe-T-Whip & Restraints Inc. for top-notch safety solutions and industry-leading training. Contact us today to schedule your On-Site Qualified Installer Training and Certification and take the first step towards a safer, more secure oilfield operation. Together, we build a safer future for the industry.
Service
Made to Order
Service
New
API
Air Freight
Welding Cart (Single and Double Gas Bottle Variations)
TR4-D1-2 Double Gas BottleCanaweld Inc. in Vaughan
Introducing the Canaweld TR4-D Series Welding Cart - Your Ultimate Welding Companion! Are you tired of welding carts that just don't meet your needs? Look no further - Canaweld's TR4-D Series is here to revolutionize your welding experience. Our design team has meticulously crafted a welding cart that addresses all the flaws and drawbacks of existing carts, giving you a product that is versatile, sturdy, and designed to cater to your specific requirements. Unmatched Versatility: The TR4-D Series welding cart is a true game-changer. It's compatible with a wide range of welding machines, including MIG, TIG, Stick, Plasma, Cooling Unit, and more. Plus, you have the flexibility to choose between the TR4-D1-1 Single Gas Bottle configuration or the TR4-D1-2 Double Gas Bottle configuration, depending on your needs. Need extra storage space? You can even opt for a version with a cabinet to keep all your welding helmets and personal items neatly organized. Smart Design for Easy Transport: Transporting your welding equipment has never been easier. The TR4-D Series welding cart boasts a lightweight yet robust construction that guarantees easy mobility. The excellent balance ensures smooth movement, even on slanted surfaces, making it perfect for use in the oil and gas industry's demanding conditions. Customizable to Fit Your Machines: We understand that every welding machine is unique, which is why the TR4-D Series offers a middle horizontal panel that can be adjusted to the height of different machines. With CNC machine precision manufacturing, assembly is a breeze, and the fixed nut system eliminates the need for time-consuming nut separation. Experience quick and accurate installation, allowing you to focus on what matters - welding! Safety and Security at the Core: Safety is paramount when it comes to welding equipment. The TR4-D Series welding cart comes equipped with belts, locks, and chains to keep your gas bottles and capsules securely in place. The added security lock ensures your machine stays safe during transport and storage. Smooth Maneuverability: Navigating through your welding workspace is effortless with the TR4-D Series welding cart. The front swivel casters with brakes, along with the 10-inch wheels at the back, allow for smooth and stable movement, even in tight spaces. Built to Last: We understand that durability is vital in the oil and gas industry. That's why the TR4-D Series welding cart features galvanized parts, providing enhanced protection against scratches and wear, ensuring it stands the test of time. Unparalleled Convenience: We've thought of everything to make your welding experience a breeze. The TR4-D1-2 Double-Gas-Bottle model even includes storage space for TIG ROD, brackets for hanging welding cables and power cords, and a TIG Torch and MIG GUN holder. Elevate Your Welding Experience: Don't settle for subpar welding carts that fail to meet your expectations. Upgrade to the Canaweld TR4-D Series Welding Cart and experience the ultimate in versatility, convenience, and durability. Take your welding to new heights with Canaweld - your trusted partner in welding excellence.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
EnviroBlu 4 Litre Industrial Cleaner
EnviroBlu Cleaner and DegreaserMekapisk EnviroBlu Solutions Inc. in St. John’s
Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Venturi Junk Basket for Coiled Tubing Applications
VJB Venturi Junk BasketMarlin Oil Tools in Calgary
Introducing the VJB Venturi Junk Basket from Marlin Oil Tools: The Advanced Solution for Efficient Well Cleanout Operations Marlin Oil Tools is proud to unveil the VJB Venturi Junk Basket, a cutting-edge downhole tool engineered to tackle the challenge of removing solid debris from wells, especially when particles are too heavy for standard circulation removal. This innovative tool is designed to enhance well intervention procedures, ensuring a clean and unobstructed wellbore essential for optimal production and operational safety. Key Features of the VJB Venturi Junk Basket: Venturi Effect Cleaning: Utilizes the Venturi effect, generated by flow through the tool's nozzles, to efficiently suck solid debris and well fluid into the basket for removal. Selective Debris Filtration: Features a filter that captures large particles (>3 mm in diameter) while allowing liquid to return to the annulus, ensuring effective debris removal without losing valuable well fluids. Secure Debris Retention: Equipped with cartridges and flapper valves inside the basket to securely hold debris, even when circulation is halted, preventing backflow. Magnetic Debris Capture: Offers the option to install a magnet within the tool, enhancing the capture of small metal particles and ensuring a thorough cleanout. Expandable Collection Volume: Can be fitted with an extended housing to increase the internal volume for debris collection, accommodating larger cleanout operations. Integrated Milling Capability: When faced with compressed debris, the VJB can be mounted on a downhole motor with a crown mill shoe, allowing for the milling of compressed debris while simultaneously sucking up drilled particles. Elevate your well cleanout operations with the VJB Venturi Junk Basket from Marlin Oil Tools, a premier downhole tool designed for the efficient removal of solid debris in oil and gas wells. By harnessing the Venturi effect, the VJB enhances debris removal capabilities, particularly for heavy particles that are difficult to extract via standard circulation. With its innovative features, including selective filtration, secure debris retention, and optional magnetic capture, the VJB Venturi Junk Basket is an essential tool for maintaining well integrity and optimizing production. Whether dealing with loose or compressed debris, the VJB offers customizable solutions, including expandable collection volumes and integrated milling functionality, making it a versatile choice for comprehensive well cleanout needs. Why Choose the VJB Venturi Junk Basket from Marlin Oil Tools? Enhanced Cleanout Efficiency: Leverages the Venturi effect for superior debris removal performance. Versatile Debris Management: Captures a wide range of particle sizes, from large solids to small metal fragments. Customizable Tool Options: Adaptable design with optional extensions and magnetic capabilities to suit specific operational needs. Operational Versatility: Suitable for both loose and compressed debris, ensuring thorough well cleanout under various conditions. The VJB Venturi Junk Basket by Marlin Oil Tools represents the forefront of well cleanout technology, offering unparalleled efficiency and adaptability in debris removal operations. Incorporate the VJB into your well maintenance and intervention strategies for cleaner, safer, and more productive wells.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Introducing Safe-T-Whip™ Continuous RD-Long 13’ (SW-RD-02-L): Unparalleled Safety and Reliability for Longer Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to introduce our latest innovation - the SW-RD-02-L Safe-T-Whip™ Continuous RD-Long. Designed specifically for regular duty applications that require a longer restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a longer restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Long to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Long is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Long is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Long is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Long, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is the ultimate safety restraint for longer applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Secure your Safe-T-Whip™ Continuous RD-Long today.
Buy
In Stock
Product & Service
New
API
Air Freight
Hoca Oil Tools in Zwartemeer
Maximizing Downhole Efficiency with HOCA Oil Tools' Plug with Valve Sub-Assembly In the challenging and intricate world of downhole oil and gas operations, having reliable, high-quality tools is essential to ensure efficiency, safety, and the success of interventions. HOCA Oil Tools stands at the forefront of this industry with its innovative Plug with Valve Sub-Assembly, designed to cater to the critical demands of downhole environments. Our products are crafted to provide unparalleled performance, ensuring your operations run smoothly and effectively. HOCA’s Plug with Valve Sub-Assembly: Precision Engineered for Downhole Success Our Plug with Valve Sub-Assembly is specifically designed for robust and reliable downhole application, offering a versatile solution for various operational needs. These plugs are essential for tasks such as pressure isolation, testing, and fluid control within the wellbore. Made with precision and from high-grade materials, they are built to withstand the harsh downhole environment, ensuring durability and operational integrity. Experience the HOCA Oil Tools Advantage By integrating HOCA Oil Tools’ Plug with Valve Sub-Assembly into your downhole operations, you are choosing a solution that emphasizes quality, performance, and customer satisfaction. Our commitment to innovation and excellence ensures that our products meet the complex demands of the oil and gas industry, providing you with tools that not only meet but exceed your operational requirements. Our Plug with Valve Sub-Assembly represents the pinnacle of downhole tool design, offering a blend of reliability, efficiency, and performance. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with advanced solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and leverage the power of our Plug with Valve Sub-Assembly to enhance your operational success. Partner with us and embrace the future of downhole operations with tools that set new industry standards for quality and performance. With HOCA Oil Tools, elevate your downhole operations to new levels of efficiency and reliability, ensuring your success in the competitive oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
CWB National Leasing in Winnipeg
Drive Your Business Success with Dry Freight Van Leasing from CWB National Leasing Enhancing Logistics and Delivery Services with Flexible Leasing Options For businesses involved in logistics, distribution, and delivery services, dry freight vans are crucial for transporting goods safely and efficiently. Leasing dry freight vans through Canadian Western Bank (CWB) National Leasing presents an effective and financially strategic option. Here’s how leasing dry freight vans can benefit your business operations: 1. Quick Access to Essential Equipment CWB National Leasing understands the urgency of keeping your operations moving. Their leasing process is designed for speed, typically approving applications and notifying your equipment dealer about the payment within 48 hours. This swift service means you can have your dry freight vans delivered and operational quickly, minimizing any disruptions to your logistics chain. 2. Enhanced Financial Capability Leasing dry freight vans with CWB National Leasing empowers your business with increased buying power. It allows you to conserve cash by opting for periodic payments over a significant upfront investment. This approach frees up capital for other essential business activities. Additionally, you can customize your vans with extra features or accessories for a minimal increase in payments. 3. Balanced Cash Flow Management The lease structure, with smaller payments over the term, enables your dry freight vans to start generating revenue for your business while they are being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, vital for long-term business stability and growth. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is particularly advantageous for businesses with variable income, ensuring that payments are manageable and tailored to your financial situation. 5. Potential Tax Advantages Leasing dry freight vans can offer tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the equipment. Consulting with a tax advisor can provide insights into how leasing can enhance your business’s tax position. Conclusion Opting to lease dry freight vans through CWB National Leasing is a strategic move that equips your business with essential transportation equipment while maintaining financial agility. It ensures access to the necessary vehicles for your logistics and delivery operations without the financial strain of a large initial investment, paving the way for operational efficiency, business expansion, and increased profitability.
Service
In Stock
Service
New
ISO
AV Annulus Safety Valve 9-5/8 inch
Annulus ValveMidastream Supply Company in Airdrie
The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature
Buy
Made to Order
Product
New
API
Sea Freight
Seamless Global FX Transactions
Personal FInancial ServicesDunbridge Financial in Oakville
Unlock Your Financial World with Dunbridge Financial's Personal Services Are you ready to take control of your finances and experience a world of seamless global transactions? Look no further than Dunbridge Financial! As the leading financial service provider, we are committed to delivering personal services that prioritize your convenience, security, and financial prosperity. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. When we say "no hidden fees," we mean it. Our commitment is to show you exactly what you'll be charged – what you see is what you get! Access our live exchange rates and enjoy the peace of mind that comes from knowing you're getting the most out of every transaction. Security as Our Top Priority Your trust is invaluable to us, and that's why security is at the core of everything we do. Rest assured, your funds and data are safe with Dunbridge. We've partnered with payment service providers who comply with ISO27001, ensuring that your client funds are managed with the highest level of safety and security. With Dunbridge, you can enjoy peace of mind like never before. Effortless Money Management Across Borders Managing your finances across international borders should be simple, and that's precisely what we offer at Dunbridge Financial. Our easy-to-use service enables you to send money quickly and efficiently to over 100 countries. Whether you need to manage investments in your home country while abroad, explore offshore investment opportunities, pay your mortgage for a vacation villa or investment property, or receive your pay and expenses in your preferred currency – we've got you covered. How It Works 1. Simplified Sending and Receiving Using Dunbridge Financial is as easy as 1-2-3. Choose where and to whom you want to send money, lock in your favorable exchange rate, and you're all set. It's hassle-free and designed to save you time and effort. 2. Personalized Foreign Investment Management Maximize your investment potential with Dunbridge Financial's tailored solutions. We assist you in managing your investments in your home country from abroad, explore lucrative offshore investment opportunities, and facilitate seamless mortgage payments in different countries. Embrace the freedom to pursue your financial goals worldwide. 3. Flexible Payment Solutions Work or travel abroad without worries. With Dunbridge, you can have your pay and expenses paid in your currency of choice, making your international experience truly rewarding. Discover Financial Freedom Today Join the countless individuals who have already experienced the benefits of Dunbridge Financial's personal services. Whether you're a seasoned investor looking for global opportunities or an individual navigating international payments, we are here to empower you with convenience, security, and savings. Take the first step towards unlocking your financial world today. Embrace Dunbridge Financial, where Live Rates, Security, and Ease of Use converge to provide you with an unparalleled personal financial experience. Your journey to financial freedom starts with us!
Service
Made to Order
Service
New
ISO
Air Freight
Sivam S.p.A. in Spoltore
Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.
Buy
In Stock
Manufacturer
New
API
Air Freight
CSA 120 unit Locking FAST charger rack
Miner's Cap Lamp Charging StationProvix in New Lowell
Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
MS-201EC Extraction Condensing Steam Turbine
Multistage TurbineKessels Engineering Works Pvt. Ltd. in New Delhi
Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Canaweld Inc. in Vaughan
Powerful, Portable, and Versatile: Introducing the MMA 201 Welding Machine At Canaweld, we take pride in providing welders with top-notch equipment that delivers high-quality performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we are excited to present the MMA 201 - a welding machine that exceeds expectations in power, versatility, and durability. Powerful Performance on the Go The MMA 201 is your ultimate welding companion, offering the best-in-class duty cycle in its category. With a maximum current of 200A and the ability to deliver 160A with a 100% duty cycle, this welding machine provides the extra power you need to tackle challenging welding tasks all day long. Whether you're on a construction site or working in the oil & gas industry, the MMA 201 has got your back. Portable and Lightweight Design We understand the importance of mobility for welders on the go. That's why we've designed the MMA 201 to be portable and lightweight, making transportation effortless. The included carrying belt ensures ease of movement, allowing you to take this welding powerhouse wherever your work demands. Unmatched Versatility The MMA 201 is more than just a Stick Welding machine. It also excels in TIG welding with a lift start, providing you with the versatility to take on a wide range of welding applications. Whether you're working with steel, stainless steel, or aluminum, the MMA 201 delivers excellent arc characteristics with the most common rods up to 5/32 inches. Built to Withstand the Toughest Conditions The MMA 201 is tested in extreme conditions, proving its resilience in temperatures up to 104°F (40°C). Its rugged construction and large size Dinse style welding connectors ensure durability and reliability even in the harshest environments. Advanced Features for Effortless Welding With automatic hot start, arc force function, and electrode anti-sticking capabilities, the MMA 201 provides an unmatched welding experience. It's fan-cooled and thermally protected against overheating, safeguarding your equipment for long-lasting performance. Experience Excellence with Canaweld When you choose the MMA 201, you choose excellence backed by Canaweld's comprehensive 3-year warranty. Trust in a welding machine that's engineered to exceed your expectations and deliver the power, versatility, and durability you need. Empower your welding journey with the MMA 201 Welding Machine. Elevate your skills, tackle challenging projects, and take your welding to new heights with Canaweld. Your welding success begins with the MMA 201 - Where Power Meets Portability!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Cleanstream B.V. in Ter Apel
Cleanstream: Ensuring Safe and Efficient Storage of NORM Material At Cleanstream, we understand the importance of maintaining a safe and sustainable environment. That's why we have developed rigorous procedures and controls to ensure that NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. NORM, or Naturally Occurring Radioactive Material, is present in many industries, including oil and gas, mining, and manufacturing. While it is a naturally occurring substance, it can be harmful if not handled properly. That's why Clearstream has taken proactive steps to ensure that our clients can safely and responsibly manage their NORM material. Our state-of-the-art storage facilities are equipped with the latest technology to monitor and control environmental factors, including temperature, humidity, and radiation levels. Our experienced team of professionals is trained to handle NORM material safely and efficiently, ensuring that it is stored in compliance with all regulatory requirements. At Cleanstream, we understand that our clients' needs are unique, and we work closely with them to develop customized solutions that meet their specific requirements. Our flexible storage options are designed to accommodate various types of NORM material, and we can quickly and efficiently adapt to changing circumstances. We take great pride in our commitment to safety, quality, and environmental responsibility. Our rigorous procedures and controls ensure that our clients can have peace of mind, knowing that their NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. Contact us today to learn more about how Cleanstream can help you safely and responsibly manage your NORM material.
Rental
Currently in Use
Service
New
ISO
Land Freight
Surface Controlled Subsurface Safety Valve NE 2-3/8
SCSSSV NEMidastream Supply Company in Airdrie
The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Sign in to add favorite