Pressure and Temperature Memory Gauge Service

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Maximize Well Integrity and Safety with HOCA Oil Tools' BHP Tool Accessories In the complex and demanding realm of oil and gas extraction, ensuring well integrity and optimizing production are paramount. HOCA Oil Tools rises to this challenge with our premium BHP (Bottom Hole Pressure) Tool Accessories, specifically designed to enhance the performance and reliability of downhole pressure monitoring systems. These accessories, vital for the precise measurement and control of well conditions, are engineered to complement our BHP tools, facilitating accurate data acquisition and ensuring well safety. HOCA’s BHP Tool Accessories: Elevating Downhole Precision and Reliability Our BHP Tool Accessories range includes various components crucial for the efficient operation of bottom-hole pressure tools. From specialized adaptors that ensure secure fittings to protective carriers designed to safeguard sensitive instruments during deployment and retrieval, each accessory is crafted to meet the highest standards of quality and performance. By addressing the unique challenges of downhole environments, HOCA Oil Tools provides the oil and gas industry with solutions that not only meet but exceed operational demands. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools' BHP Tool Accessories means choosing a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to innovation and quality ensures that our products not only meet industry standards but also provide the reliability and performance essential for today's challenging oilfield environments. By integrating our BHP Tool Accessories into your operations, you are not only optimizing your downhole monitoring capabilities but also investing in the safety and longevity of your equipment. With HOCA Oil Tools, you gain access to a comprehensive suite of solutions designed to elevate your operational success. Choose HOCA Oil Tools for your BHP Tool Accessories and join the ranks of industry professionals who trust our products to enhance their downhole operations. Partner with us, and unlock the full potential of your oil and gas extraction activities with tools and accessories crafted for excellence. With HOCA Oil Tools, empower your downhole operations with precision-engineered solutions that deliver unmatched performance and reliability.

Introducing Safe-T-Whip HD-01 5’-6”: The Pinnacle of Heavy Duty Safety Restraints At Safe-T-Whip & Restraints Inc., safety is not just a priority; it's our passion. We are thrilled to unveil our most powerful safety restraint yet - the SW-HD-01 Safe-T-Whip HD. Engineered for heavy-duty applications, this safety whip is designed to provide unparalleled protection and reliability in the most demanding oilfield environments. Unmatched Heavy-Duty Design: Identified by its striking red color and accompanied by an orange tag, SW-HD-01 Safe-T-Whip HD is crafted from robust 3/4" 12-Strand HMPE fiber, earning its name as a "Heavy Duty" (HD) safety restraint. This formidable whip is built for use on 3-inch 1502 hammer union pipelines up to an astounding 15,000psi or 4-inch iron up to 10,000psi. When it comes to restraining high-pressure flowlines in extreme conditions, trust Safe-T-Whip HD-01 to deliver unmatched performance. Redefining Heavy-Duty Safety: Safe-T-Whip HD-01 is designed to withstand the toughest challenges that the oilfield can throw its way. With its heavy-duty construction, this safety restraint offers maximum reliability and protection, even under high-pressure circumstances. The high strength of 3/4" 12-Strand HMPE fiber ensures your team's safety is never compromised. Exceptional Performance, Uncompromising Safety: When it comes to restraining heavy-duty pipelines, Safe-T-Whip HD-01 stands in a league of its own. Its superior strength and durability make it an essential asset for oilfield operations. The bright red color and orange tag make it easily recognizable, emphasizing the importance of safety on your worksite. Designed for the Toughest Conditions: The Canadian oil patch presents unique challenges and demanding drilling environments. Safe-T-Whip HD-01 is built to thrive in these extreme conditions. Its ability to resist pressure hosing and imperviousness to corrosion, oil spills, and most chemicals ensure that it remains effective and reliable, no matter the conditions. Certified and Tested for Quality: We understand that your safety is paramount, and that's why every Safe-T-Whip HD-01 undergoes rigorous testing to meet the highest industry standards. Our commitment to quality and excellence ensures that you receive a safety restraint system you can trust. Your Partner in Safety: When it comes to heavy-duty safety restraints, Safe-T-Whip & Restraints Inc. is your trusted partner. Invest in SW-HD-01 Safe-T-Whip HD to safeguard your workforce, equipment, and operations, ensuring compliance with safety regulations and providing peace of mind. Take Safety to the Next Level: Safe-T-Whip HD-01 5'-6" is the pinnacle of heavy-duty safety restraints. Trust in the power of Safe-T-Whip HD to protect your team and assets in high-pressure environments. With Safe-T-Whip & Restraints Inc., your safety is always secured.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success.

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue

Enhance Your Automotive or Manufacturing Business with Paint Booth Leasing from CWB National Leasing Boosting Quality and Efficiency in Your Painting Operations For businesses in the automotive, manufacturing, or furniture sectors, a high-quality paint booth is critical for ensuring top-notch painting and finishing. Leasing paint booths through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for your painting needs. Here’s how leasing paint booths can significantly benefit your business: 1. Fast Access to Advanced Equipment CWB National Leasing understands the importance of having the right equipment promptly. They offer a quick leasing process, typically making decisions within 48 hours of your application. This rapid turnaround means your paint booths can be delivered and operational quickly, enhancing the quality and efficiency of your painting processes. 2. Increased Purchasing Power Leasing paint booths with CWB National Leasing allows you to leverage your financial resources more effectively. By opting for periodic payments over a significant initial purchase, you free up capital for other crucial aspects of your business. The option to add extra features or accessories to your paint booths for a small payment increase also allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your paint booths start contributing to your business’s revenue while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, crucial for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Advantages Leasing paint booths can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease paint booths through CWB National Leasing is a strategic move that equips your business with essential equipment while maintaining financial agility. It ensures access to state-of-the-art paint booths, vital for delivering high-quality finishes, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved product quality, and increased profitability, helping your business to excel in the competitive automotive or manufacturing market.

When it comes to monitoring choke position in the oil and gas industry, the HDI 2522 Choke Position Indicator System sets the industry standard for precision and reliability. Designed as a 4" solid-state electronic choke position indicator, the HDI 2522 provides accurate readings in 1% increments from 0% to 100%, ensuring precise control and monitoring of choke position. Adaptable to Your Choke Requirements: The HDI 2522 can adapt to a variety of chokes commonly used in the oil and gas industry. With options for linear potentiometers, rotary potentiometers, or retractable potentiometers, you can be confident that our system will seamlessly integrate with your existing equipment. Say goodbye to the hassle of air lines to the position indicator, as the HDI 2522 eliminates the need for such additional infrastructure. Unmatched Certifications: We take safety seriously, which is why the HDI 2522 Choke Position Indicator System is certified to meet various international standards. It is IECEX certified as Ex ia IIC T4 Ga, ATEX certified as Ex II 1 G Ex ia IIC T4 Ga, and CSA certified as Class I, Division 1, Groups A, B, C, D T4, Ex ia IIC T4 Ga, and Class I, Zone o, AEx ia IIC T4 Ga. These certifications provide peace of mind knowing that our product meets the highest safety standards. Superior Features for Optimal Performance: • Lightweight and durable design: With a weight of only 2 lbs, the HDI 2522 is designed to be easily manageable without compromising on durability. The polycarbonate/PBT alloy case ensures impact resistance and UV stabilization for long-lasting performance. • High-resolution display: The 3-digit digital display, along with the 0-100% scale and linear analog bar graph, provides clear and precise choke position readings. The low battery indicator ensures that you are always informed about the battery status. • Extended viewing distance: The HDI 2522 allows for a viewing distance of up to 15 feet, enabling easy monitoring from a distance. • Flexible potentiometer options: The system accepts a wide range of 2k-25k ohm potentiometers, providing versatility for different choke configurations. • Maximum inline cable length: With a maximum inline cable length of 1,500 feet, the HDI 2522 offers flexibility in installation, ensuring accurate readings regardless of the distance from the gauge head to the point of measurement. Configuration Options for Enhanced Compatibility: To suit your specific requirements, the HDI 2522 offers various configuration options. Choose between 4-20mA output or 0-1 volt output, allowing seamless integration with your existing systems. Additionally, slave and secondary displays are available for expanded visibility and control. Experience the HDI Advantage: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. With the HDI 2522 Choke Position Indicator System, you gain access to cutting-edge technology and unparalleled support. Our team is dedicated to providing customized solutions tailored to your unique needs. Contact us today to discuss your choke position monitoring requirements and discover how the HDI 2522 can optimize your operations. Trust Houston Digital Instruments for superior accuracy and reliability. Where Precision Meets Performance - HDI, your partner in measurement excellence.

Unleash Precision and Control with Poseidon Robotics' Advanced Manipulator Arms In the fascinating world of subsea exploration and robotics, precision and control are paramount. Poseidon Robotics, the leading innovator in subsea robotics, is proud to introduce our cutting-edge Manipulator Arms – a revolutionary solution designed to elevate your underwater operations to new heights of efficiency and performance. The Reach Alpha – A Marvel of Engineering At Poseidon Robotics, we believe in bringing you the best of the best. That's why we have collaborated with BLUEPRINTLABS in Australia to present the Reach Alpha, a state-of-the-art manipulator arm that embodies excellence in design, engineering, and performance. Crafted with precision and tested rigorously, the Reach Alpha is the epitome of reliability, making it an indispensable tool for your subsea missions. Integration for Maximum Convenience At Poseidon Robotics, we understand that time is of the essence in your underwater endeavors. That's why we offer the option to integrate the Reach Alpha manipulator arm onto your system before shipping. Our expert technicians ensure seamless integration, saving you valuable time and effort during setup and installation. With the Lanai Pro seamlessly integrated into your system, you can hit the water running and focus on what truly matters – accomplishing your mission with precision and efficiency. Precision at Your Fingertips The Reach Alpha 5-Function control system, developed by BLUEPRINTLABS, empowers you with unparalleled control over the Reach Alpha manipulator arm. With five precision functions at your fingertips, you can manipulate objects with dexterity and ease, replicating the human hand's natural movements even in the depths of the ocean. This level of control opens up new possibilities for scientific research, subsea inspections, construction projects, and even search and rescue operations. Designed for Durability and Performance Poseidon Robotics takes pride in delivering products that endure the harsh subsea environment. The Reach Alpha manipulator arm is engineered with high-quality materials and undergoes extensive testing to ensure it withstands the rigors of underwater operations. Its robust construction, combined with BLUEPRINTLABS' cutting-edge control technology, offers you a manipulator arm that performs flawlessly, mission after mission. Enhance Your Subsea Operations With Poseidon Robotics' advanced manipulator arms, you can accomplish tasks with unparalleled precision and efficiency. Whether you are performing intricate scientific research or handling heavy equipment during construction projects, the Reach Alpha is the perfect companion to elevate your subsea operations to new heights. Choose Poseidon Robotics When it comes to subsea robotics, Poseidon Robotics stands above the rest. With a commitment to innovation, quality, and customer satisfaction, we have earned the trust of professionals in the industry worldwide. Our partnership with BLUEPRINTLABS brings you the finest manipulator arm technology available today. Embrace Precision and Performance Join the ranks of successful subsea explorers who trust Poseidon Robotics' Manipulator Arms for their critical underwater operations. Embrace precision, embrace performance, and achieve new levels of success with Poseidon Robotics by your side. Elevate Your Subsea Operations Today Take the first step towards unparalleled precision and control. Contact Poseidon Robotics today to learn more about our advanced Manipulator Arms and how they can transform your subsea missions. Let us be your partner in success as you explore the depths and conquer new frontiers beneath the waves.

Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.

Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence.

Secure Your ROV with Poseidon Robotics' Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. At Poseidon Robotics, we understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always At Poseidon Robotics, safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. The Poseidon Advantage With years of experience in subsea robotics and ROV technology, Poseidon Robotics has earned a reputation for excellence in the industry. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today When it comes to ROV transportation, trust Poseidon Robotics to deliver the best. Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection with Poseidon Robotics!

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Achieving Uninterrupted Connectivity in the Oil and Gas Industry with Nulux Wireless Access Points Connectivity within the sprawling expanse of the oil and gas industry is pivotal to ensuring seamless operations, meticulous project planning, and scrupulous quality assurance. Recognizing the industry's intricate need for steadfast communication, Nulux Network Solutions proudly presents its expertise in Wireless Access Points (WiFi), a service meticulously sculpted to facilitate unbroken connections even in the most challenging terrains and bustling work environments. Unlocking New Operational Efficiencies with WiFi Solutions Incorporating wireless connections into your operational fabric isn't merely about ensuring communication; it's about unlocking new echelons of operational efficiencies, enabling rapid documentation review, streamlining QA-QC processes, and enhancing project planning through unbroken connectivity. Nulux, with its robust wireless networks, assures that every corner of your business, whether it be the office, the warehouse, or the facility floor, stays interconnected, propelling your business towards enhanced time and cost efficiency. Advantages of Opting for Nulux Wireless Access Points Reliability: In environments where every second count, our WiFi solutions ensure that your data transmission remains steadfast, unbroken, and secure. Customization: Understanding that every facility has unique challenges, our team designs WiFi networks that are meticulously tailored to your operation, ensuring optimal coverage and performance. Scalability: As your operations evolve, our wireless networks can be effortlessly expanded to cater to growing data and connectivity needs. Security: Ensuring that your data traverses through a secure network, we implement cutting-edge security protocols, safeguarding your critical operational data from potential cyber threats. Nulux – Your Ally in Enhanced Connectivity Our proficiency isn’t merely limited to providing robust WiFi solutions. Navigating through the complexities of wireless communication, we’ve developed expertise in designing and implementing various wireless infrastructures like Point-to-Point (P2P) and Point-to-Multipoint Radio Networks, and Mesh Networks, ensuring that you always find a solution that aligns with your specific needs. While P2P networks facilitate streamlined communication links between two fixed points, ensuring enhanced security and cost-effectiveness, Point-to-Multipoint networks facilitate connectivity between more than two points through a single shared line, ensuring that data can be sent and received in a many-to-many configuration. Deploying Expertise Where It Matters Being at the industry forefront in wireless technology, Nulux is committed to ensuring that as the tech evolves, your operations evolve with it. Our experienced team, having substantial experience in the nuanced domains of wireless system and infrastructure design and implementation, is dedicated to propelling your operations into a future where connectivity isn’t just ensured; it's effortlessly seamless. Elevating Operations with Nulux In an era where connectivity translates to operational proficiency, Nulux emerges as your partner, ensuring that every node of your operation stays interlinked through robust, secure, and reliable wireless networks. Explore the future of unhindered connectivity in the oil and gas sector with Nulux Network Solutions – where technology and expertise converge to elevate your operations. Join hands with Nulux, and let’s weave a network of unbroken connectivity, propelling your operations into a future where every data point, every communication, and every connection is seamless, secure, and reliable.

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Introducing the FRO (Flow Release Overshot) from Marlin Oil Tools: Your Ultimate Solution for Efficient Fishing Operations in Oil and Gas Well Interventions Marlin Oil Tools is proud to present the FRO (Flow Release Overshot), a sophisticated downhole tool specifically designed to revolutionize fishing operations during well intervention. The FRO is engineered to offer unparalleled efficiency and reliability in capturing and retrieving objects ("fish") from the wellbore, ensuring smooth and successful operations. With its replaceable collet and adaptable design, the FRO is a must-have tool for any well intervention toolkit. Key Features of the FRO (Flow Release Overshot): Versatile Collet Design: The FRO features a replaceable collet system designed to catch and secure a smooth surface of fish, accommodating a wide range of outer diameters from 1.0” to 2-1/8”. Customizable Bottom Guide: Upon client request, the bottom of the overshot can be equipped with a guide leap, enhancing its ability to guide and catch fish with precision. Secure Fish Retrieval: The collet of the FRO overshot securely grips the fish, holding it firmly during the lifting process out of the well, ensuring safe and efficient retrieval. Pressure-Release Mechanism: In situations where the captured object cannot be released from the well, the FRO allows for an easy disengagement by applying pressure through the coil tubing, offering an additional layer of operational safety. SEO Optimized Description for Marlin Oil Tools’ FRO: Elevate your well intervention and fishing operations with the FRO (Flow Release Overshot) from Marlin Oil Tools, a leading downhole tool engineered for maximum retrieval efficiency in the oil and gas industry. Featuring a replaceable collet for capturing a range of fish sizes and an optional guide leap for enhanced precision, the FRO ensures secure and successful fish recovery. With its unique pressure-release mechanism, the FRO offers an innovative solution for challenging fishing scenarios, making it an essential component of your well intervention arsenal. Choose the FRO for reliable, efficient, and safe fishing operations. Why Choose the FRO from Marlin Oil Tools? Adaptable to Various Fish Sizes: Designed to accommodate a broad range of fish diameters, ensuring versatility across operations. Enhanced Precision and Safety: Optional guide leap improves catch accuracy, while the secure grip minimizes risks during retrieval. Innovative Release Mechanism: Provides a reliable method for disengaging from stubborn fish, enhancing operational flexibility. Durability and Reliability: Constructed to withstand the harsh conditions of downhole environments, ensuring consistent performance. The FRO (Flow Release Overshot) by Marlin Oil Tools represents the forefront of innovation in well intervention fishing operations. Incorporate the FRO into your operations to achieve optimal outcomes in fish retrieval, backed by the reliability and efficiency Marlin Oil Tools is known for.

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.