Hydraulic Control Line for SCSSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Empowering Operations with Advanced Solutions: InWaTec Combined’s Specialized E-line Tool Services At InWaTec Combined, we are dedicated to pushing the boundaries of operational excellence in the primary industries sector. Our specialized E-line tool services are meticulously crafted to address the unique challenges faced by operators, offering a suite of cutting-edge solutions that epitomize efficiency and redefine maintenance standards. In the heart of every successful operation lies the ability to adapt and innovate. InWaTec Combined’s specialized E-line tool services are the embodiment of this ethos. With our comprehensive array of tools, we empower operators to enhance well performance, streamline diagnostic processes, and execute interventions with unparalleled precision. Our services are not just about providing tools; they are about delivering a strategic advantage. Here’s a glimpse into our suite of specialized E-line tool services: Diagnostic Excellence: With the fast-paced evolution of well technologies, the need for accurate diagnostics has never been more critical. Our suite includes state-of-the-art logging tools that provide real-time data on well conditions, enabling operators to make informed decisions swiftly. Precision Interventions: Whether it's for perforation, plug setting, or cutting, our E-line tools are engineered for precision. We understand that each intervention is unique, and our tools are designed to deliver tailored solutions that ensure successful operations, every time. Maintenance and Recovery: Our maintenance tools, from scrapers to bailers, are selected for their reliability and effectiveness. When it comes to recovery operations, our fishing tools are second to none, providing the assurance that you can retrieve what is needed without undue delay. Customized Solutions: Recognizing that each operation has its distinct challenges, we offer customized tool services. Our expert team works closely with clients to develop and deploy tools that are specifically designed to meet the unique demands of their wells. InWaTec Combined is committed to innovation and excellence. Our specialized E-line tool services are continually evolving, incorporating the latest technologies and methodologies to stay ahead of industry demands. By partnering with us, operators gain access to a level of efficiency and maintenance capability that sets new industry benchmarks. We believe in a future where every operation is optimized for peak performance, and our specialized E-line tool services are a cornerstone of this vision. Choose InWaTec Combined for your operations, and experience the power of advanced tools and expert service that drive success.

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.

The absorbent spill kit 4.6-gallon bag contains, 5 Pads 8’ x 11.5” 1 Sorbent Sock 3” x 4ft 1 Bilge 1 Pair Nitrile Gloves 1 Disposal Bag Part number: OH-OOS-BO Use for small spills inside boats and near boat launches. Using an Oil Only Absorbent Spill Kit in a 4.6-gallon bag highly recommended for marine environments. It ensures that you are equipped to address oil spills swiftly and effectively, protecting the marine environment and complying with regulations. 5 Pads 8’ x 11.5” This package includes five absorbent pads, each measuring 8 feet by 11.5 inches. These pads are made for effective liquid cleanup, offering versatility and practicality. These pads are suitable for quick and efficient absorption of liquids, including oils and hydrocarbons. Their compact size and absorbent properties make them an ideal solution for managing spills in diverse industrial, automotive, and emergency response scenarios. 1 Sorbent Sock 3” x 4ft This package comprises a single Sorbent Sock, measuring 3 inches in diameter and 4 feet in length. The sock is made for efficient containment and absorption of liquid spills, particularly oil-based substances. Its mouldable and adaptable nature allows it to conform to different surfaces, making it versatile for diverse spill response applications. Whether used as a standalone solution or as part of a spill kit, this Sorbent Sock provides a targeted and effective response to spills. 1 Bilge A specific component designed for managing bilge water in a marine setting. The bilge component includes absorbent materials tailored for addressing water contaminated with oil or other hydrocarbons in a boat's bilge. This ensures a comprehensive solution for various spill scenarios that might occur on a boat. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 1 Disposal Bag Includes 1 Disposal Bag, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bag is employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. The absorbent spill kit in a 4.6-gallon bag is a complete package for marine use as it incorporates a range of components designed to address spills effectively and safely, whether they involve oil, fuel, or bilge water, ensuring a comprehensive and responsible spill response on boats and ships.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing the SST Hydraulic Setting Tool from Marlin Oil Tools: The Ultimate Mechanical Solution for Downhole Equipment Setting Marlin Oil Tools is proud to present the SST Hydraulic Setting Tool, a fully mechanical downhole tool engineered to revolutionize the setting of bridge plugs and cement retainers within the well casing. Designed for versatility, the SST can be deployed via coil tubing or traditional tubing, making it a crucial component for enhancing well integrity and operational efficiency in oil and gas interventions. Key Features of the SST Hydraulic Setting Tool: Versatile Application: Compatible with both coil tubing and traditional tubing, offering flexible deployment options for various well intervention scenarios. Mechanical Activation: Utilizes a simple yet effective mechanical activation process, where a ball landing in the piston initiates the setting mechanism. Precise Setting Capability: Provides accurate and reliable setting of bridge plugs and cement retainers, crucial for wellbore stability and integrity. High-Pressure Performance: Engineered to withstand the shear pressure required to move the piston and secure the downhole equipment in place. Optimized for Well Interventions: Enhances the efficiency and safety of well interventions by ensuring the precise placement of downhole tools. Ease of Operation: The straightforward mechanical design ensures ease of use, minimizing potential operational complications. Elevate your well intervention and completion processes with the SST Hydraulic Setting Tool from Marlin Oil Tools, a premier mechanical solution designed for the oil and gas industry. This innovative tool simplifies the setting of bridge plugs and cement retainers, ensuring optimal well casing integrity. Compatible with both coil tubing and traditional tubing, the SST offers unparalleled versatility and reliability. With its mechanical activation mechanism and high-pressure performance, the SST Hydraulic Setting Tool is essential for achieving precise downhole equipment placement, enhancing operational efficiency and well integrity. Choose the SST for a streamlined, effective approach to well interventions. Why Choose the SST Hydraulic Setting Tool from Marlin Oil Tools? Flexible Deployment Options: Ensures compatibility with various intervention methods, increasing tool utility. Reliable Mechanical Activation: Simplifies the setting process, reducing the risk of operational errors. Precision in Downhole Settings: Guarantees the accurate placement of bridge plugs and cement retainers for improved well performance. Durability Under Pressure: Built to endure the rigorous conditions of downhole operations, offering lasting performance. The SST Hydraulic Setting Tool by Marlin Oil Tools represents the cutting edge in downhole mechanical solutions, providing operators with a powerful tool for enhancing well completion and intervention outcomes. Incorporate the SST into your operations to ensure efficient, accurate, and reliable downhole equipment setting.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Our pump skids can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these units are highly reliable and easy to operate. Clients use our pump skids multiple uses including; corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, Nitrate injection, and more. These skids are rated for offshore and onshore use and can be custom ordered for your specific needs.

Embrace Sustainability: Redefine Energy Management with ELEKS As the world shifts towards renewable energy sources, forward-thinking organizations are taking the lead in creating a more sustainable future. With ELEKS' software development expertise, you can navigate the path to sustainable energy solutions and significantly reduce your direct carbon footprint. Our innovative solutions empower you to embrace environmentally-friendly practices, encourage climate change awareness, and streamline energy management practices—all while cutting costs and enhancing your operational efficiency. Pioneering Sustainability with ELEKS Energy Software Development: Unlock the potential of an advanced energy management software solution that transforms your business power system into a beacon of sustainability, productivity, accessibility, and safety. Investment in Sustainable Energy Solutions: Our software development expertise guides you in making strategic investments in sustainable energy solutions, such as electric vehicles powered by emerging technologies. Join the ranks of industry leaders committed to building a greener future. Environmentally Friendly Energy Consumption: Cultivate a culture of environmentally-friendly energy consumption within your organization. Our solutions empower you to lead by example and inspire others to adopt sustainable practices. Climate Change Awareness: By embracing sustainable energy solutions, you're not only reducing your carbon footprint but also raising climate change awareness within your industry. Be a catalyst for positive change and inspire others to follow suit. Reduced Costs and Streamlined Practices: Sustainability doesn't just benefit the environment—it also benefits your bottom line. Our solutions help you streamline energy management practices, optimize processes, and reduce operational costs. ELEKS: Your Partner in Sustainability Decades of Expertise: With 30 years of experience in custom software development, ELEKS is a trusted partner in helping energy producers, distributors, and organizations optimize energy efficiency and drive sustainability. Cutting-Edge Solutions: Our software team is at the forefront of innovation, utilizing Cloud, IoT, blockchain, drones, and other cutting-edge technologies to design bespoke data-driven software solutions and energy management systems. Addressing Industry Challenges: We understand the unique challenges faced by the energy and utility industry. Our solutions are tailored to address the specific needs of various energy sources, facilities, and businesses. Embrace the Green Revolution with ELEKS ELEKS' software development expertise is your gateway to a sustainable future. By adopting eco-friendly energy solutions, you're not only reducing your carbon footprint but also contributing to a more sustainable world. Lead the way in your industry, inspire change, and partner with ELEKS to redefine energy management for a brighter future.

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.

Introducing Safe-T-Whip RD Anchor (SW-A-RD-01): Your Anchor for Unmatched Safety and Reliability Safety is our top priority at Safe-T-Whip & Restraints Inc., and we are thrilled to present our latest innovation - the SW-A-RD-01 Safe-T-Whip RD Anchor. This indispensable anchor is designed to provide robust restraint for flowline installations in the oilfield, ensuring the utmost safety for your team and equipment, even in the most demanding conditions. Unparalleled Design and Performance: Identified by its bright yellow color and yellow tag, SW-A-RD-01 is made from 1/2" 12-Strand HMPE fiber, making it a Regular Duty (RD) anchor ideal for use on 2-inch 1502 hammer union pipelines up to 5000psi, 3-inch iron up to 3000psi, or 4-inch iron up to 2000psi. When your operations require an anchor connection for flowline restraint, it is crucial to use a designated Safe-T-Whip™ Anchor, ensuring maximum safety and reliability. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). This synthetic fiber is as strong as steel-wire ropes, yet significantly lighter, making it easy to handle, store, and transport. With its resistance to pressure hose and immunity to corrosion, oil spills, and most chemicals, our anchor ropes are specifically engineered to thrive in the extreme drilling and fracking conditions of the Canadian oil patch. Chemical Immersion and Temperature Resilience: SW-A-RD-01 demonstrates exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. Additionally, it operates efficiently within a wide temperature range from -65°C to +65°C. Our anchor ropes are chemically inert, ensuring they stand the test of time and remain reliable under the harshest conditions. Your Economic and Comprehensive Solution: Purchasing a Safe-T-WhipTM system offers numerous advantages for multiple and long-term projects. Owning your safety restraint system gives you control over your job sites and projects without any delays, while also allowing you the flexibility to rent or purchase additional components as your needs change. The durability and ease of storage of our system ensure a long-lasting investment that will protect your workforce and hardware for years to come. Full Certified Training and In-house Financing: When you choose Safe-T-Whip & Restraints Inc., you not only acquire top-notch safety equipment but also receive a full certified Safe-T-Whip training program on installation, maintenance, and storage. Our experts are available to support your team throughout any project, ensuring smooth assembly and disassembly. Additionally, we offer in-house financing on all new projects, making it easier than ever to acquire your complete safety restraint system. Global Shipping Made Easy: Thanks to the lightweight nature of our system, we can provide direct and economical shipping throughout Canada and the world. Rest assured that your Safe-T-Whip RD Anchor will reach you swiftly and securely, ready to deliver unbeatable safety on your worksites. Protect Your Worksite with Safe-T-Whip: Invest in the SW-A-RD-01 Safe-T-Whip RD Anchor and safeguard your worksite, hardware, and workforce while ensuring full compliance with work safety regulations. Trust Safe-T-Whip & Restraints Inc. for the ultimate safety solutions in the oilfield industry.

Enhance Your Fabrication Capabilities with Pipe Bender Leasing from CWB National Leasing Streamlining Your Operations with Cost-Effective and Flexible Equipment Solutions For businesses in the plumbing, HVAC, automotive, or construction industries, precision in pipe bending is crucial for efficient operations and quality workmanship. Leasing pipe benders through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their pipe fabrication capabilities. Here’s how leasing pipe benders can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing understands the importance of having the right tools for your trade. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your pipe benders can be delivered and operational swiftly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing pipe benders with CWB National Leasing boosts your buying power. It allows you to spread costs over manageable periodic payments rather than a significant initial purchase, freeing up capital for other vital business operations. The option to add extra features or accessories to your pipe benders for a small payment increase enables customization to meet specific project requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your pipe benders start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing pipe benders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease pipe benders through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial flexibility. It ensures access to high-quality pipe benders, vital for precise and efficient pipe fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved project quality, and increased profitability, helping your business to excel in its respective industry.

Introducing the STM Step Mill from Marlin Oil Tools: Your Go-To Solution for Advanced Well Intervention and Milling Operations Marlin Oil Tools is excited to offer the STM Step Mill, a cutting-edge downhole tool specifically designed to enhance the efficiency of well intervention jobs. Whether you're dealing with bridge plugs, emergency lost equipment, or any obstruction softer than the mill's cutter, the STM Step Mill is engineered to grind and wash out these objects with unmatched efficiency. Key Features of the STM Step Mill: Superior Milling Performance: Designed to navigate and mill through downhole obstructions effectively, ensuring a clear wellbore for optimal production. Reduced Friction Surface: The STM Step Mill features a unique design with less friction surface, enabling it to mill out harder materials more efficiently than traditional tapered mills. Enhanced Weight-on-Bit Application: Its innovative design allows for higher weight on bit without the risk of stalling the downhole motor, maximizing milling effectiveness. Optimal Debris Removal: Equipped with multiple flushing holes, the STM ensures the efficient circulation of drilling fluid to remove milled particles from the well and cool the cutting edge. Durable Carbide Construction: Built with carbide welded onto the body, including options for crushed carbide and various insert designs, the STM Step Mill is designed for longevity and performance in challenging milling conditions. Comprehensive Redress Services: Marlin Oil Tools offers redress services for worn carbide, ensuring your STM Step Mill maintains peak performance throughout its service life. Elevate your well intervention strategies with the STM Step Mill from Marlin Oil Tools, a premier downhole tool designed for the oil and gas industry. Tailored for efficient grinding and removal of downhole obstructions, the STM Step Mill stands out with its reduced friction surface and ability to tackle harder materials without stalling the downhole motor. With its advanced carbide construction, optimal debris removal capabilities, and customizable insert options, the STM Step Mill is the ideal choice for increasing the ID of well restrictions and ensuring smooth wellbore conditions. Opt for Marlin Oil Tools’ STM Step Mill for enhanced well intervention and milling operations, backed by comprehensive redress services to extend tool life and performance. Why Choose the STM Step Mill from Marlin Oil Tools? Advanced Milling Efficiency: Offers unmatched efficiency in grinding down wellbore obstructions. Capability to Mill Harder Materials: Designed to tackle harder materials with greater ease compared to conventional mills. Higher Weight-on-Bit Flexibility: Enhances milling operations by allowing higher weight on bit without compromising tool performance. Customization and Longevity: Provides various carbide insert designs and redress services, ensuring a long service life tailored to your specific operational needs. The STM Step Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering a powerful solution for oil and gas operators focused on optimizing well intervention outcomes. Incorporate the STM Step Mill into your operations for smoother, more efficient wellbore preparation and obstacle management.

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success.

Houston Digital Instruments (HDI Gauges) proudly introduces the HDI 1522 Choke Position Indicator System, a cutting-edge solution designed to monitor choke position with unparalleled accuracy in the oil and gas industry. With its solid-state electronic technology and versatile adaptability, the HDI 1522 offers exceptional performance, safety, reliability, and low maintenance for users. Let's explore the features and benefits of this innovative choke position indicator. Precise Monitoring with Advanced Technology: The HDI 1522 Choke Position Indicator System utilizes solid-state electronic technology to provide precise monitoring of choke position in 1% increments, ranging from 0% to 100%. This high level of accuracy enables operators to have real-time visibility and control over choke operations, optimizing production efficiency and safety protocols. Adaptability for Various Chokes: The HDI 1522 can seamlessly adapt to a wide range of chokes commonly used in the oil and gas industry. Whether it's a linear potentiometer, rotary potentiometer, or retractable potentiometer, the HDI 1522 accommodates different choke types, ensuring compatibility and flexibility for diverse operational requirements. This adaptability eliminates the need for multiple indicators, simplifying equipment management and reducing costs. Air Line-Free Design: One of the standout features of the HDI 1522 is its air line-free design. Unlike traditional choke position indicators that require air lines, the HDI 1522 operates without the need for air lines, minimizing complexity and potential issues associated with air line maintenance. This streamlined design enhances reliability and reduces downtime, contributing to improved operational efficiency. Safety, Reliability, and Low Maintenance: HDI Gauges are renowned for their commitment to safety, reliability, and low maintenance, and the HDI 1522 is no exception. Constructed with durable materials, including impact-modified, UV-stabilized polycarbonate/PBT alloy, the gauge provides long-lasting performance in challenging industrial environments. The gauge head's operating temperature range of -40°F to 176°F (-40°C to 80°C) ensures reliable operation in extreme conditions. Additionally, the HDI 1522 features a gasket seal for electronics protection, safeguarding the system from external elements and prolonging its lifespan. User-Friendly Display and Configuration Options: The HDI 1522 incorporates a user-friendly 3-digit digital display, offering clear visibility of choke position. The display includes a 0-100% scale and a linear analog bar graph, allowing operators to monitor choke position at a glance. A low battery indicator ensures timely battery replacement, preventing interruptions in monitoring operations. The gauge's viewing distance of 15 feet enables operators to access choke position information conveniently. The HDI 1522 also provides versatile configuration options to meet specific user requirements. These options include 4-20mA output (additional barrier required), 0-1 volt output, slave/secondary display capability, and serial output, enabling seamless integration with other indicator gauges and control systems. HDI Gauges' expertise and support ensure that clients can customize their HDI 1522 for optimal functionality and compatibility. Industrial Grade Design for Explosive Atmospheres: Safety is paramount in the oil and gas industry, especially in explosive atmospheres. The HDI 1522 is specifically designed to meet industrial-grade standards and can be safely deployed in explosive atmospheres. Its panel-mounted gauge with remote sensor connections enhances operational safety while complying with stringent industry regulations. The HDI 1522 Choke Position Indicator System from HDI Gauges revolutionizes choke position monitoring in the oil and gas industry. With its solid-state electronic technology, adaptability to various choke types, air line-free design, and robust construction, the HDI 1522 ensures accurate and reliable choke position monitoring, enhancing operational efficiency and safety. Experience the power of precision with the HDI 1522 Choke Position Indicator System and unlock greater control over your choke operations. Contact HDI Gauges today to explore how the HDI 1522 can elevate your oil and gas operations.

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Acid Treatments! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! Our Thru-Tubing Acid Stimulation product is designed to deliver outstanding results with minimal hassle. Deploying this innovative solution via electric wireline has never been easier. Whether you choose the HCL or HCL/HF acid blend, our product is formulated to provide exceptional performance tailored to your needs. How does it work? Our secret lies in the specially formulated solid acid stick. Whether it's delivered via slickline, wireline, coil tubing, or tractor, it releases heated acid vapor precisely at the zone of interest. This targeted approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the acid vapor. And here's the best part: the acid vaporizes and becomes fully spent down-hole, resulting in no contaminated effluent. Say goodbye to spills, post-treatment clean-up, and disposal headaches! The benefits of choosing Thru-Tubing Acid Stimulation are abundant. Firstly, you contribute to reducing CO2 emissions, making a positive impact on the environment. With reduced downtime, you can keep operations running smoothly, saving valuable time and money. Implementation is simple, thanks to the user-friendly design and efficient deployment method. The pinpoint accuracy of our solution ensures increased precision, leading to enhanced results. And because it's fast-acting, you'll see the benefits sooner than ever before. But the advantages don't stop there. Thru-Tubing Acid Stimulation also helps lower manpower, rig, and equipment costs. With reduced corrosion and wear, your equipment will last longer, minimizing maintenance and replacement expenses. Furthermore, no surface spillage means a safer working environment and reduced exposure to hazardous materials for your team. Join the ranks of forward-thinking companies that are embracing Thru-Tubing Acid Stimulation by StimStixx Technologies. Experience the power of innovation, efficiency, and environmental consciousness. Get in touch with us today and take your acid treatments to new heights!

Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Secure Your ROV with Poseidon Robotics' Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. At Poseidon Robotics, we understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always At Poseidon Robotics, safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. The Poseidon Advantage With years of experience in subsea robotics and ROV technology, Poseidon Robotics has earned a reputation for excellence in the industry. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today When it comes to ROV transportation, trust Poseidon Robotics to deliver the best. Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection with Poseidon Robotics!

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT