8 1/2 inch PDC Bit

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed.

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Accelerate Your Construction Projects with Excavator Leasing from CWB National Leasing Enhance Your Operational Efficiency and Financial Flexibility In the dynamic world of construction, having access to advanced equipment like excavators is key to staying competitive and efficient. Leasing your excavator through Canadian Western Bank (CWB) National Leasing offers a versatile and financially astute solution that aligns with your project needs and budget. Here’s how leasing an excavator can be a game-changer for your construction business: 1. Swift Equipment Delivery CWB National Leasing prioritizes speed and efficiency. They review your application promptly and typically notify your equipment dealer about the payment within 48 hours of approval. This rapid process means your excavator can be delivered and operational in no time, keeping your projects on track. 2. Boosted Purchasing Power With CWB National Leasing, you can enhance your financial leverage. Opt for manageable periodic payments instead of a large upfront cost, freeing up capital for other critical business needs. Plus, the flexibility to add extra features or accessories to your excavator with a minor increase in payments further enhances its utility and efficiency. 3. Balanced Cash Flow Management Leasing an excavator allows for smaller payments over the term of the lease, enabling the equipment to start generating revenue while you're still paying for it. This approach helps maintain a favorable balance between your expenses and income. 4. Adaptable Payment Plans CWB National Leasing offers tailor-made payment options, including seasonal, semi-annual, or annual plans, to align with your business's cash flow. This adaptability is especially crucial in the construction industry, where income can vary based on project timelines. 5. Potential Tax Advantages Leasing can offer significant tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the excavator. It's advisable to consult with a tax advisor to understand how leasing can improve your business’s tax position. Conclusion Opting to lease an excavator through CWB National Leasing is a strategic decision that empowers your construction business with the right tools while maintaining financial agility. It enables you to deploy state-of-the-art excavators in your projects while managing your finances effectively, paving the way for enhanced efficiency, growth, and profitability in the competitive construction market.

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer.

Dive into the Depths: Enhance Your ROV Skills with Poseidon Robotics' ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs At Poseidon Robotics, we understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in Poseidon Robotics' ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join Poseidon Robotics' ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. Dive into the depths with confidence, precision, and efficiency, guided by Poseidon Robotics' unwavering commitment to excellence in subsea robotics training.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

InWaTec Combined: Enhancing Wellbore Clarity with Advanced Hydrostatic Bailer Services In the diverse and demanding world of well servicing, maintaining a clear and functional wellbore is essential for the efficient operation of drilling rigs, workover operations, and production wells. InWaTec Combined stands at the forefront of this vital service with our Hydrostatic Bailer running services, offering a sophisticated solution to the age-old challenge of collecting solids and cleaning the wellbore. The Necessity of Hydrostatic Bailer Operations Hydrostatic Bailers are an integral component in the suite of tools required for effective well maintenance. The principle behind these tools is simple yet ingenious—they utilize the pressure differential created by the well fluid to draw debris into the bailer, effectively removing it from the wellbore. This operation is crucial, as it ensures that the wellbore is free from obstructions that could hinder subsequent interventions or impede production. Versatile Solutions for Onshore and Offshore Operations Whether dealing with onshore wells nestled in the heart of a bustling oil field or offshore platforms braving the open seas, InWaTec Combined’s Hydrostatic Bailer services are designed to adapt to any environment. Our tools and techniques are as versatile as they are effective, ensuring that no matter the location, the cleanliness and functionality of the wellbore can be maintained to the highest standards. Technology-Driven Efficiency InWaTec Combined’s commitment to technological innovation is embodied in our Hydrostatic Bailer services. By employing the latest advancements in well servicing technology, we provide a more efficient and reliable means of wellbore cleaning. This not only optimizes the bailing process but also translates into significant time and cost savings for our clients. Prioritizing Safety and Environmental Stewardship Safety and environmental protection are paramount in all of InWaTec Combined’s operations. Our Hydrostatic Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of responsible operations, especially in sensitive onshore and offshore locations. Your Partner in Operational Excellence Choosing InWaTec Combined for your Hydrostatic Bailer needs means partnering with a company that is dedicated to excellence. Our Hydrostatic Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Clarity in Every Operation In conclusion, InWaTec Combined’s Hydrostatic Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, efficiency, safety, and environmental responsibility, we ensure that your wellbore cleaning operations are performed to the highest standards. Trust InWaTec Combined to deliver clear solutions for your wellbore challenges, ensuring the uninterrupted success and productivity of your operations.

Expand Your Global Business Horizons with Dunbridge Financial: Streamlined International Payments and Receipts As a thriving global business, you understand the importance of efficient and cost-effective international transactions. Say goodbye to complexities and uncertainties with Dunbridge Financial's comprehensive Business Services. We empower you to take advantage of foreign exchange opportunities, manage multiple currencies effortlessly, and benefit from personalized concierge customer service. One Platform, Limitless Possibilities At Dunbridge Financial, we believe in simplifying your international business operations. Our elegant platform is designed to cater to all your needs, from collecting and managing foreign currencies to making secure international payments. Embrace the convenience of handling your global finances from a single platform, eliminating the need for multiple systems. Concierge Customer Service - Your Dedicated Business Partner Our commitment to customer satisfaction goes beyond transactional interactions. With Dunbridge Financial, you get more than just a service; you gain a dedicated business partner. Experience how we embed with our customers to understand their unique needs and develop a tailored payment strategy that suits your business objectives. Each customer is assigned a dedicated account manager, ensuring that you receive personalized support every step of the way. Fast and Secure International Payments Speed and security are the cornerstones of our international payment services. Benefit from our global banking relationships, allowing you to make cost-effective payments to over 100 currencies and 120 countries. Rest assured that your financial information is safeguarded with our market-leading platform, compliant with ISO27001. Multi-Currency Accounts for Seamless Transactions Managing multiple currency balances has never been easier. With Dunbridge Financial, you can receive and manage funds in your company's name, all within a single account. Enjoy the convenience of receiving like a local with real accounts featuring IBAN, ACH, and SEPA capabilities. When needed, effortlessly transfer funds between currencies, maximizing your financial flexibility. Mass Payments - Efficiency at Its Finest Time is money, and we value both for your business. Our Mass Payments feature allows you to upload, manage, and pay up to 1000 payees at a time. Streamline your Accounts Payable processes, saving time and effort while ensuring accuracy and promptness in every transaction. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider; we are your dedicated partner in driving your international business growth. When you choose us, you gain access to: • Expert guidance and personalized support from our dedicated account managers • Secure, compliant, and efficient global banking relationships for seamless transactions • Cutting-edge technology that simplifies complex financial processes Join Us Today and Embrace Global Business Success Unlock the full potential of your global business with Dunbridge Financial. Sign up for your free global business account within 24 hours and experience the ease of managing all your international payments and receipts from one elegant platform. Take the complexity out of your FX payment strategy, optimize your financial efficiency, and elevate your international business endeavors with confidence. Empower your global business horizons with Dunbridge Financial. Sign up now and open the door to a world of limitless possibilities. Take your business to new heights with streamlined international transactions, personalized customer service, and unwavering financial support.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Unlock the Future of Datacenter Virtualization with ALCiT's VMware Partnership In the realm of technological innovation, few names shine as brilliantly as VMware. As part of the Dell EMC family and the driving force behind transformative tech advancements, VMware stands as a beacon of excellence in the IT landscape. ALCiT is thrilled to be more than just a partner – we're your gateway to a future defined by datacenter virtualization. VMware: The Powerhouse Behind Industries With an ecosystem of over 30,000 partners, VMware's influence has been nothing short of revolutionary. Through tech innovations that have changed the very fabric of industries, VMware has redefined what's possible in the digital realm. ALCiT's partnership with VMware is your ticket to harnessing this unparalleled potential. Virtualization: The Heartbeat of Efficiency Efficiency Redefined: No datacenter achieves its true potential without the magic of virtualization. At its core, VMware's platform embodies efficiency, enabling you to manage your resources with unmatched ease. Mastery of the Platform: At ALCiT, VMware isn't just a tool; it's our canvas. We know VMware like the back of our hand – from selling and configuring to maintaining and maximizing its capabilities. Seamless Integration: Virtualization isn't just about technology; it's about integration. ALCiT ensures that VMware seamlessly integrates into your ecosystem, propelling you toward unparalleled efficiency. Unleash the Power of VMware with ALCiT Consultation: Dive deep into the world of VMware with ALCiT's expert guidance. Together, we'll map out a virtualization strategy that empowers your digital journey. Configuration and Implementation: From conceptualization to reality, ALCiT configures and deploys VMware to align perfectly with your needs. Ongoing Support: Virtualization isn't just a one-time event; it's an ongoing journey. ALCiT's unwavering support ensures that your VMware experience remains flawless. Embrace the Future Today ALCiT's partnership with VMware isn't just a collaboration; it's your path to datacenter transformation.

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer.

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Re-Inventing Industrial Cleaning with EnviroBlu: The Ultimate Solution for Equipment and Large Areas In the high-speed, high-stakes world of industry, efficiency and cost-effectiveness aren't just goals—they're necessities. Enter Mekapisk EnviroBlu Solutions Inc. and our 20-litre EnviroBlu cleaning solution. Specifically engineered for cleaning equipment and expansive areas, this product delivers exceptional power while staying true to our commitment to environmental sustainability. Why EnviroBlu is a Game-Changer At EnviroBlu, we're not just committed to safe cleaning; we're redefining it. Our water-based, non-toxic, phosphate-free formula ensures rapid, reliable cleaning without compromising the planet. Here's how our 20-litre EnviroBlu can revolutionize your cleaning routine: 1. Unmatched Cleaning Efficiency EnviroBlu’s advanced aqueous surfactant technology dives deep, penetrating dirt and grime at the molecular level. Whether you're tackling industrial machinery, large equipment, or sprawling floor spaces, EnviroBlu gets the job done faster and more efficiently, saving you precious time. 2. Significant Cost Savings With EnviroBlu, cleaning time and product usage are drastically reduced. Our potent formula means you use less to achieve more, leading to substantial cost savings. The 20-litre size is perfect for bigger cleaning tasks, ensuring you have ample supply for extensive use. 3. Environmentally Friendly Our unwavering commitment to sustainability is infused into every bottle of EnviroBlu. The water-based, non-toxic, and phosphate-free formula means you can clean confidently, knowing you're protecting the environment. Maintain a safe, eco-friendly workspace while adhering to the highest environmental standards. 4. Versatile and Reliable EnviroBlu is your all-in-one solution for various applications, from heavy-duty equipment cleaning to large-scale maintenance. Its versatility makes it indispensable in industrial, commercial, and even residential settings. Whatever the task, EnviroBlu delivers consistent, reliable results. 5. Certified Safe for Various Uses EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures our product is safe across diverse environments, including food processing areas and maritime industries, meeting stringent safety standards. 6. Easy to Use Our 20-litre EnviroBlu product comes with straightforward instructions for both small and large cleaning tasks. Whether using a power washer or manual methods, EnviroBlu's efficiency makes the process hassle-free and effective. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Dilution Ratios 100% • Cleaning heavy machinery and equipment • Cleaning oil spills from most surfaces, including asphalt • Degreasing engines and concrete floors 75% • Flushing out impurities from pipes and radiators • Preparing surfaces for primer and paint in metal applications • Cleaning wheels, tires, ovens, and grills 50% • Cleaning interiors of vehicles and aircraft • Cleaning fiberglass boats, swimming pools, and food processing equipment • Cleaning carpets, upholstery, and kitchen appliances 25% • Cleaning leather, vinyl, and painted walls Stay Green, Go Blu! Opt for the 20-litre EnviroBlu for your equipment and large area cleaning needs. Our powerful, eco-friendly formula ensures exceptional results while saving you time and money. Embrace a cleaner, greener future with EnviroBlu.

Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity.

Harnessing the Power of Seamless Connectivity in the Oil and Gas Sector with Nulux’s Fiber Optic Fusion Splicing In the intricate and demanding environments of the oil and gas industry, ensuring seamless, reliable, and robust data transmission is paramount. Every segment of the extensive energy value chain, from exploration and extraction to transportation and refinement, hinges upon unfettered communication and data flow. Nulux Network Solutions, steadfast in its commitment to supporting customers towards a more sustainable future, proudly shines a spotlight on one of its sterling services: Fiber Optic Fusion Splicing. Demystifying Fusion Splicing Fusion splicing is not merely a technical process; it’s an art form where two pieces of fiber optic cables are meticulously joined together to craft a permanent bond. It is not merely about connecting two cables; it's about facilitating a continual, unbroken pathway for data, ensuring that your critical information traverses across your networks without hesitation or impedance. The resultant creation is a single, coherent piece of fiber, capable of being utilized in myriad applications, especially where the amalgamation of multiple fibers or cables is necessitated. Given the specialized nature and the precise equipment required to perform fusion splicing, it is indispensable to collaborate with a proficient service provider – a role where Nulux jubilantly finds its calling. Ensuring Unparalleled Data Transmission with Fusion Splicing Embarking upon fusion splicing is not merely opting for a connection; it's choosing the promise of the most reliable, consistent, and high-fidelity data transmission possible. This not only amplifies the effectiveness of your optical network but also significantly bolsters its durability, ensuring that your operations in the oil and gas sectors are perpetually connected and operational. Why Nulux Stands Unparalleled in Fiber Optic Fusion Splicing Our expertise transcends providing products and solutions; it’s a commitment to walk alongside our customers, guiding them on their journey towards not just operational efficiency but towards a future that leans into sustainability. At Nulux, we provide: Expertise Across the Energy Value Chain: From upstream to downstream, our services encapsulate the entirety of the energy value chain, ensuring that every node of your operation is seamlessly connected. Custom Solutions: We delve into understanding the unique operational landscape of your facilities, providing tailored fiber optic solutions that resonate with your specific requirements. Sustainable Future: Aligned with the global pivot towards sustainability, our solutions are crafted not just with an eye on operational efficiency but also with a commitment towards fostering a sustainable future. Infinite Possibilities with Uninterrupted Connectivity Engineering professionals in the oil and gas sector grapple with a multitude of challenges, and data transmission should not be one of them. Fiber Optic Fusion Splicing by Nulux is not merely a service; it's a pledge of uninterrupted connectivity, a guarantee of flawless data transmission, and a commitment to bolstering your operations with unparalleled connectivity solutions. In the realms of the digital evolution of the oil and gas sector, every bit of data is vital, and ensuring it reaches its destination without interruption is critical. Choose Nulux Network Solutions for your Fiber Optic Fusion Splicing, and let’s craft a future where your data flows as seamlessly as your operations. Your network. Our solutions. Nulux’s promise of a connected future.

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported.