Project Planning

Introducing the BPX-SPAN, the elastomer-free bridge plug designed to withstand even the toughest well conditions. With the use of our patented metal to metal X-SPAN seal technology, the BPX-SPAN provides a mechanical seal and anchor to the casing wall, making it a great solution for wells that cause elastomers to swell on standard bridge plugs while running in the hole. The BPX-SPAN has a short design for quick removal and is capable of setting in any grade casing, including P-110. It also boasts a range of optional equipment, including a ceramic knock out sub, pump out sub, burst disc, tailpipe assembly with profile subs, and a velocity string, making it a versatile system for any well application. Unlike standard bridge plugs that can have exposed elastomers to create a seal to the casing wall, the BPX-SPAN's sealing element utilizes a metal to metal seal that bonds and seals to the casing wall, ensuring a reliable seal that won't fail during run-in and setting. With no moving parts, slips, shear screws, or set screws, you can trust the BPX-SPAN to provide a long-lasting solution for temporary or permanent service. Please note that for bridge plug applications, our published pressure ratings may not apply to the system, as those ratings are based on collapse and burst pressure ratings. However, with a rating of over 550°F, you can trust the BPX-SPAN to withstand even the harshest well conditions. If you have any questions about the BPX-SPAN or any other ID OILTOOLS system, please contact our Tech Services department for assistance. Choose the BPX-SPAN for a reliable, elastomer-free solution for all your well application needs.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The demand for truck transport continues to grow and companies have realised it is effective to enter into long term contracts with dedicated service providers. Find the best equipment customised for your needs. Truck transportation effectively remains the most direct solution for the transport of goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. Contact us to to discuss the truck you want and what the possibilities are.

Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix.

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success.

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Navigating Through the Digital Veins of the Oil and Gas Industry: Introducing DeltaV Backbone Infrastructure by Nulux Network Solutions In the ever-evolving arena of the oil and gas industry, where massive volumes of data traverse through the intricate digital veins of complex operational networks, the prowess of a robust, secure, and efficient backbone infrastructure stands undisputed. At Nulux Network Solutions, we comprehend the pulse of this digital heartbeat, presenting a bespoke service for engineering professionals in the sector: The DeltaV Backbone Infrastructure. A Symphony of Sustainable Solutions: Lighting the Path with Fiber Optics In an era where sustainability intertwines with technological advancements, Nulux unfurls a spectrum of products, solutions, and services across the comprehensive energy value chain. Endeavoring to illuminate your journey toward a sustainable future, our Fiber Optic solutions embody the quintessence of high-speed, reliable, and secure data transmission across your operational ecosystems, ensuring that your digital operations move with an unparalleled rhythm of coherence and efficiency. The DeltaV Backbone Infrastructure: Navigating through the Digital Nexus Our DeltaV Backbone Infrastructure is not merely a service but an orchestrated amalgamation of technology, expertise, and reliability, ensuring your operations in the oil and gas sectors are streamlined, secure, and synergistically attuned to the digital transformations permeating the industry. Robust Data Transmission: Ensuring that your operational data, ranging from real-time analytics to predictive maintenance insights, traverse securely and efficiently across the digital pathways. Enhanced Reliability: With a fiber-optic backbone, experience a network with minimal downtime and robust resistance against physical wear and tear, providing a perennial flow of vital operational data. Scalable Solutions: As your operations expand, so does our DeltaV Backbone Infrastructure, ensuring that your growing data demands are met with equal vigor and capacity. Intricate Weaving of Data and Operations The DeltaV Backbone Infrastructure meticulously intertwines with your operational nodes, ensuring that the massive data generated at every point is seamlessly integrated, analyzed, and utilized, providing a foundation upon which strategic decisions can be formulated and executed with precision. Safeguarding your Digital Pathways Ensuring that your data pathways are not just operationally optimized but also securely fortified, the DeltaV Backbone Infrastructure is built upon stringent security protocols, ensuring a secure digital environment wherein your data is shielded against potential cyber vulnerabilities. Embark on a Journey with Nulux Traverse through the digital corridors of the oil and gas industry with Nulux Network Solutions, where your data is not merely transmitted but is secured, analyzed, and utilized to sculpt a future where your operations resonate with sustainability, efficiency, and innovative prowess. With the DeltaV Backbone Infrastructure, you navigate through a digital nexus, where every byte of data, every decision and every operational stride is backed by the robust reliability, unparalleled speed, and secure pathways of our state-of-the-art fiber-optic solutions. Ensuring a Future where Data Drives Decision In an operational universe where data is the catalyst for decisions, ensuring its secure, reliable, and efficient transmission becomes paramount. Navigate with Nulux, where your data doesn’t just traverse; it drives your operations towards a future where every decision is data-driven, every operation is efficient, and where your journey towards sustainability is always illuminated by the reliable glow of our solutions. Your journey through the digital and operational landscapes of the oil and gas industry begins with Nulux – where your data finds its true pathway, and where your operations find their true rhythm. Let's sculpt a future, together, navigating through the digital veins of innovation, sustainability, and operational excellence.

Attention all logistics managers and shipping professionals - if you're looking for a reliable and versatile solution for transporting and storing goods with unusual heights and dimensions, look no further than Sivam's Offshore Cargo Baskets! Our cargo baskets are designed to be flexible and adaptable, with lashing points that allow you to add tarps for added protection or simply use them as open tops. Thanks to their unique shape, these baskets can carry an unusually large weight for their size, making them the perfect choice for maximizing floor space and optimizing ease of use. At Sivam, we take safety and quality seriously, which is why our offshore baskets are DNV certified. You can trust that your goods will be safely stored and transported when you choose Sivam's Offshore Cargo Baskets. Our base in Italy means that we can serve clients all over the world, offering reliable and efficient shipping solutions no matter where you're located. We understand the importance of timely and dependable shipping, which is why we're committed to providing our customers with the best possible service. Don't settle for less when it comes to transporting and storing your valuable goods. Choose Sivam's Offshore Cargo Baskets and experience the difference in quality and convenience today!

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.

Attention all logistics managers and shipping professionals - if you're looking for a reliable and versatile solution for transporting and storing goods with unusual heights and dimensions, look no further than Sivam's Offshore Cargo Baskets! Our cargo baskets are designed to be flexible and adaptable, with lashing points that allow you to add tarps for added protection or simply use them as open tops. Thanks to their unique shape, these baskets can carry an unusually large weight for their size, making them the perfect choice for maximizing floor space and optimizing ease of use. At Sivam, we take safety and quality seriously, which is why our offshore baskets are DNV certified. You can trust that your goods will be safely stored and transported when you choose Sivam's Offshore Cargo Baskets. Our base in Italy means that we can serve clients all over the world, offering reliable and efficient shipping solutions no matter where you're located. We understand the importance of timely and dependable shipping, which is why we're committed to providing our customers with the best possible service. Don't settle for less when it comes to transporting and storing your valuable goods. Choose Sivam's Offshore Cargo Baskets and experience the difference in quality and convenience today!

Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.

Unlock Peace of Mind with ALCiT's Cybersecurity Assessment Are you ready to take charge of your digital security? Do You Cybersecure®? At ALCiT, we're not just asking questions – we're providing solutions that empower Small and Medium Enterprises (SMEs) to become and remain cybersecure. Step into the realm of confidence, armed with knowledge and actionable insights to safeguard your digital future. Curious to Learn and Improve? Your curiosity could be your greatest asset in the world of cybersecurity. ALCiT, a team of seasoned cybersecurity experts, has meticulously crafted an assessment that reveals where you stand and how you can elevate your security posture. Our quick yet comprehensive assessment is designed to uncover vulnerabilities and opportunities for improvement. Fast-Track to Cybersecurity Excellence At ALCiT, we understand that time is of the essence. Our assessment process is complemented by workshops and cutting-edge tools. This synergy enables us to swiftly extract essential information and deliver a detailed report that not only benchmarks your current status against peers but also outlines short- and long-term actions to enhance your cybersecurity resilience. Three Scenarios, One Solution: Cybersecurity Assessment Confidence Confirmation: Think you've covered all your bases? Don't leave it to chance. Our Cybersecurity Assessment acts as your second opinion, confirming your security efforts and offering suggestions for further strengthening. Navigating the Unknown: If issues loom and you're unsure where to begin, our Cybersecurity Assessment is your guiding light. Gain actionable insights, pinpoint vulnerabilities, and receive a roadmap for securing your digital realm. Preventing the Next Headline: News of the latest hack might send shivers down your spine. Don't wait for disaster to strike. Enroll in our 'Become Cybersecure Accelerator,' a comprehensive package that includes our Cybersecurity Assessment and immediate remediation. With us by your side, you'll be equipped to thwart potential threats before they materialize. Secure Today, Thrive Tomorrow Your journey to becoming cybersecure starts now. Take that crucial step towards safeguarding your organization, your data, and your future. Choose ALCiT as your cybersecurity partner, and let us illuminate the path to a more secure digital landscape.

Elevating Downhole Precision: HOCA Oil Tools B.V.'s Slickline Stem Solutions In the intricate arena of oil and gas extraction, downhole operations necessitate tools that promise not only precision but also unwavering reliability. HOCA Oil Tools B.V. takes pride in offering a sophisticated range of slickline stems that cater to a myriad of operational needs, ensuring unmatched performance and safety. Our expertise in crafting these essential tools is evident from the wide array of slickline stems available, designed to enhance the efficiency and safety of wireline operations. Benefits of Using HOCA's Slickline Stems: Enhanced Downhole Control: Our stems provide the necessary weight to ensure smooth and controlled movements of the tool string within the wellbore, enhancing operational precision. Versatility for Various Applications: From standard solid bars to specialized options like lead or tungsten filled, our range caters to different well conditions and requirements. Optimized Performance: The added weight helps counteract wellbore pressure, improving the impact and effectiveness of downhole tools, particularly in jarring operations. Increased Safety: Proper use of slickline stems reduces the risk of wireline snapping and other operational hazards, ensuring a safer environment for field personnel. Durability in Harsh Conditions: Manufactured with high-quality materials, our stems are designed to withstand the demanding conditions of downhole environments. Customization Options: Available in various sizes and materials, our stems can be tailored to meet the specific needs of each operation, ensuring maximum efficiency and effectiveness. Main Features of HOCA's Slickline Stems: Type ‘A’ Stem (Weight Bar): Offers solid bar configurations ideal for standard operations, providing necessary weight to the tool string with threaded connections for easy integration. Type ‘BO’ Lead Filled Stem: Incorporates lead within the stem to add substantial weight, ideal for deeper or more challenging well conditions, ensuring better control and impact. Type ‘EO’ Roller Stem: Features external rollers to minimize friction and wear during operations, enhancing the stem's longevity and performance in deviated wells. Type ‘ED’ Tungsten Filled Stem: Utilizes tungsten to provide maximum weight in a minimal space, perfect for high-pressure wells where additional downforce is required. Customization and Variety: Our stems are available in various lengths, diameters, and thread connections, ensuring compatibility with different tool strings and operational needs. HOCA Oil Tools B.V.'s commitment to quality and innovation is reflected in our slickline stem offerings. By providing a comprehensive range of sizes, materials, and types, we ensure that our clients have access to the tools necessary for their unique downhole challenges. Trust HOCA for your downhole tool needs, where precision meets durability.

Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.

Navigating Through the Intricacies of DCS Networks: Nulux's Unparalleled Expertise in Design, Planning, and Installation In the digitally dominated era where distributed control system (DCS) networks stand at the helm of operational efficiency and control, especially in the critical terrain of the oil and gas industry, Nulux Network Solutions etches its prowess in delivering bespoke, resilient, and high-performance network solutions. Your Strategic Partner in DCS Network Management With over two decades deep-diving into telecommunications and networking, Nulux has not just witnessed but actively shaped the evolution of industrial networks, especially when it comes to complex and crucial DCS network upgrades across the expanse of North America. Our hands-on experience spans from installing, maintaining, to strategic troubleshooting and upgrading multifaceted copper cabling systems, a testimony to our comprehensive mastery over the domain. At the heart of our operations reside resolute perfectionism and an unyielding commitment to optimal workmanship, which not only fills a significant industry void but also redefines the benchmark for telecom cabling providers. Your DCS Network, Crafted with Precision by Nulux Designing and Planning: Our seasoned team navigates through the complexity of your operational requirements, ensuring the DCS network is meticulously designed and planned, guaranteeing an unbroken chain of communication and control across your operational modules. Installation with Excellence: Employing our profound understanding of copper network potentials, our installation services assure you enjoy the robustness, reliability, and performance copper networks inherently bring – high-bandwidth transmission, easy termination, and dependable long-term functionality. An Expanse of Comprehensive Solutions: Nulux’s proficiency isn’t siloed into merely design and installation. Our offerings span from providing effective solutions for voice, data, video services, to crafting custom solutions that mirror your specific operational requisites. Moreover, we stand by you throughout your project’s lifecycle with unwavering technical support. Why Navigate the DCS Network Terrain with Nulux 1. Unwavering Quality: Nulux is synonymous with quality, backed by robust and high-performance networks that effortlessly manage operational data loads while ensuring cost-effectiveness and a remarkable degree of reliability and durability. 2. Tailored Solutions: Your operational needs are unique, and we honor that uniqueness by delivering customized DCS network solutions, ensuring that the system isn’t just installed but is an actual asset enhancing your operational efficiency and control. 3. A Partner, Not Just a Provider: Our understanding of networks transcends technical know-how, delving into recognizing what truly propels businesses towards competitiveness and operational excellence. 4. A Testament of Experience: Our past endeavors echo our expertise and commitment, having successfully executed numerous industrial projects, ensuring our clients' DCS networks are not mere communication channels but strategic assets propelling operational success. In the rugged and challenging operational landscapes of the oil and gas industry, let Nulux Network Solutions be your beacon, ensuring your DCS networks are not just infrastructural installations but strategic conduits amplifying your control, communication, and operational efficiency. Embark on a journey where your DCS networks become pivotal assets driving operational success and efficiency. Connect with Nulux Network Solutions today for an initial consultation and step into a future where your operations are seamlessly integrated, controlled, and perpetually propelled towards excellence.

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported.

Introducing the new multi-trip stackable STX-SPAN version from ID OILTOOLS! This cutting-edge system is the perfect solution for isolating longer intervals in flowing or static wells. With the ability to be deployed on wire line, slick line, coil tubing or conventional tubing, the STX-SPAN is versatile and can be used in a variety of applications. The STX-SPAN is also ideal for wells with limited rig up height and on wells that have severe dog legs where only short sections will pass. Each section seals to the previous one via a ratchet latch stinger and seal bore receptacle, making it easy to use and efficient. Our stackable X-SPAN products allow for long straddle systems to be deployed in multiple runs, making it perfect for when lubricator length or well accessibility is an issue. With the ability to isolate the top and bottom of the intended zone using X-SPAN or GTX-SPAN elements, this technology allows for extremely long isolation systems to be deployed. Additionally, specially engineered seal assemblies are utilized between each sequential intermediate section for added reliability. The STX-SPAN can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material, and can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. It is also rated for high pressure and high temperature applications, making it perfect for a variety of environments. So, if you're looking for a versatile, reliable, and easy-to-use system for isolating longer intervals in your wells, look no further than the STX-SPAN from ID OILTOOLS! Contact our Tech Services department for assistance and more information on this game-changing product.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.